For a High Availability (HA) pair configuration, the SBC allows
allows configuring a
Static Route for a specific host or
CE Name among the active and standby hosts of a HA pair configuration using the
Condition element. The
Condition element store the conditions on the basis of which routes are added to a
SBC pair pair with HA configuration. Currently, the
Condition element only supports the
CE Name element.
| Noteinfo |
|---|
|
- Before configuring the
Condition using a specific CE Name, ensure that IP Interface Group Name and IP Interface Name are configured. These three elements cannot be configured and saved simultaneously. For further details, refer to System Provisioning - Ip IP Interface Group and Ip IP Interface Group - Ip IP Interface. Static Routes with specific CE Name can be added only for packet interfaces.
|
On the SBC main
main screen, navigate to
All > Address Context > Static Route > Condition.
...
The parameters in the Condition window is described below:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Parameters - Condition window |
|---|
|
| Parameter | Description |
|---|
Condition | An element in the Static Route configuration that holds the conditions on the basis of which routes are added to a SBC pair with HA configuration.Currently, Condition supports only one child element - CE Name. | CE Name | The name (1 - 255 characters) of the computing element that hosts the port used by the IP interface. |
|
| Noteinfo |
|---|
|
- The SBC does not allow to edit the
Condition for a Static Route. To change the configuration of Condition, delete the Static Route and reconfigure it.
- The SBC does not allow to delete the
CE Name separately. - A
Static Route is deleted only from the instance in which it is configured, and not from both active and standby instances of a HA pair SBC configuration.
|