Page History

Scenario

 Establish configuration to support a large group of residential VoIP subscribers.

Background Information

• Residential customers reachable through physical port “Port 3”.
• IP addressing for residential customers does not overlap with any other customers or the core network.

Workflow

1. Set "CLI context" to Address Context "default"
2. Create IP Interface Group "default.Subscriber_Access"
3. Create and configure IP Interface "default.Subscriber Access.LIF3" in "Subscriber Access". Set "LIF3" name/IP address/netmask/VLAN tag.
   1. Associate IP Interface "LIF3" with Port "Port3"
4. Create a Zone with name "Portland".
5. Create a Sip Signaling Port "default.Portland.Subscriber Signaling Port" for this Zone. Set "Subscriber Signaling Port" IP address.
   1. UDP, port 5060 is set as default; TLS is disabled by default.
   2. All subscribers in this region/context will direct traffic to this Sip Signaling Port IP address.
6. Create a SIP Trunk Group with name "Subscribers" within Zone "Portland".
7. For routing calls from each subscriber to the outside world, re-use the Routing Label created in the previous deployment scenario: "To Core Network".