Page History

Add_docset_workflowAPPRJIDSBX-33412AUTH1DEV1LDEV1SVT1LSVT1AUTHJIDSBX-33412 

...

...

Back to Table of Contents

Back to SIP Services

Back to SIP Transport

...

NOTE: When provisioning a UDP media port range, set the range slightly larger than the actual number of ports needed to support maximum simultaneous calls.

Each trunk group can include an mediaIpAddress to indicate which IP address to use when allocating UDP media. The default value is 0.0.0.0 indicating that the system will function as it currently does by choosing an IP Address from the mediaIpInterfaceGroup. The mediaIpAddress can be configured as either an IPv4 or IPv6 address except for H323, which does not support IPv6 addresses. Any IP address configured must belong to the IP Interface Group configured as the mediaIpInterfaceGroup for the trunk group.

...

For configuration details, seerefer to:

• CLI:sipTrunkGroup media  
  • SIP Trunk Group - Media - CLI,
  zone h323TrunkGroup - CLI, zone gwTrunkGroup - CLI,
  • Zone - H323 Trunk Group - CLI
  • Zone - GW Trunk Group - CLI
  • Media System - CLI
  ,
  • show table addressContext
     
• EMA: 
  • SIP Trunk Group - Media
  ,
  • H323 Trunk Group - Media
  ,
  • Gw Trunk Group - Media
  ,
  •  
  • System - Media - Media Port Range
  ,  
  • Ip Interface Group - Media Port Range Assigned - All
  , Ip
  • IP Interface Group - Media Port Range Unassigned - All