Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1eyoustra
REV5bscoggins
REV6bscoggins
REV3tasveren
REV1tasveren

Use the Sti Profile window to view and configure Secure Telephone Identify (Sti) profiles to apply to SIP trunk groups. A Sti profile controls whether authenticated identity management is enabled for a trunk group. If the Sti profile is set to  enabled on an ingress trunk group, when the SBC receives an ingress INVITE request it sends STI-related information to the PSX. The PSX is provisioned to either sign, verify, or tag the related call. The SBC then receives information back from the PSX about the service it provided, that is, signing, verification, or tagging. Note that an Sti profile must be enabled on the egress SIP trunk group for egress signaling to contain STI-related headers. Refer to STIR/SHAKEN Support for more information.

To View Sti Profiles

On the SBC main screen, go to All > Profiles > Services > Sti Profile. The Sti Profile window opens.

Caption
0Figure
1Sti Profile Window

Image Added

To Create a Sti Profile

To create a new Sti profile:

  1. Click New Sti Profile. The Create New Sti Profile window opens.

    Caption
    0Figure
    1Create New Sti Profile Window

    Image Added

  2. Enter a name for the profile in Name.
  3. Specify one of the following values for the State of the profile and then click Save.
    • Enabled – enables authenticated identity management for the trunk group to which the profile is assigned.
    • Disabled – (default) disables authenticated identity management for the trunk group to which the profile is assigned.

To Edit a Sti Profile

To edit a Sti profile:

  1. Click the radio button next to the name of the Sti profile you want to edit. The Edit Selected Sti Profile window opens.

  2. Make the required changes and click Save.

To Copy a Sti Profile

To copy a Sti profile and make changes to the copy:

  1. Click the radio button next to the name of the Sti profile you want to copy.

  2. Click Copy Sti Profile. The Copy Selected Sti Profile window opens.
  3. Make the required changes and click Save.

To Delete a Sti Profile

To delete a Sti profile:

  1. Click the radio button next to the name of the Sti profile you want to delete.
  2. Click the delete icon (X) at the end of the row.
  3. Confirm the deletion when prompted.

Pagebreak