Page History
In some scenarios where the customer would have already installed an ISO as a part of POC or test environment with an older SWe release (say 4.2.1R). But sometimes require to install or deploy a new ISO installation of SWe in Production with later release (say 4.2.3R) build. In such a case, the customer needs to re-install the ISO.
Follow the below steps to re-install the ISO:
Click your VM instance name. Right-click and select Edit Settings.
...
| 0 | Figure |
|---|---|
| 1 | Edit Settings |
Click Options tab. Click Boot Options. Check the Force BIOS Setup option and click OK.
...
| 0 | Figure |
|---|---|
| 1 | Force BIOS Setup |
...
Click Browse... Select the ISO image software file. For example, the ISO file name is sbc-V05.01.00A503-connexip-os_03.01.00-amd64.iso. Click OK.
Check the Connect at power on option and click OK.
...
| 0 | Figure |
|---|---|
| 1 | Hardware Tab |
...
Select VM Name. Click Power>Power On. BIOS setup window appears.
...
Click Boot tab, to change the boot order by selecting "CD-ROM Drive" as the first option.
...
| 0 | Figure |
|---|---|
| 1 | CD ROM First Option |
...
Press F10 to Save and Exit. A setup confirmation appears. Click Yes to save and exit.
...
...
The Connex IP OS Window appears. Select Install option and click Enter.
...
| 0 | Figure |
|---|---|
| 1 | ISO Install Screen |
...
Click Hardware tab . Click CD/DVD drive 1. Uncheck the Connect at power on option and click OK.
...
| 0 | Figure |
|---|---|
| 1 | Uncheck Connect Power On |
Click Options tab. Click Boot Options. Check the Force BIOS Setup option and click OK.
...
| 0 | Figure |
|---|---|
| 1 | Force BIOS Setup |
...
Make sure that you change the boot order back to its original. Press F10 to Save and exit and to power back your VM.
...
| 0 | Figure |
|---|---|
| 1 | Changing back to original order |
...
Overview
Content Tools