...
...
...
...
Back to Table of Contents
Back to Installing SBC 7000 Series Hardware
Back to Rack Mounting the SBC 7000 Chassis
This section provides information on the
package content and required tools to rack mount the chassis.Required Tools
Before you install the
chassis into a rack, make sure that you have the following tools and equipment readily available:- #2 Phillips screwdriver (to install brackets and the chassis)
- 7/16" (11 mm) wrench (to attach earth ground lug)
- Label maker (to label cables, if needed)
- Voltmeter (for installing units with DC power supplies)
- A marker or masking tape to mark mounting holes
SBC 7000 Package Content
Unpack and inspect your equipment and hardware to verify you have all the necessary items to install your
chassis.
Image Modified
| Excerpt |
|---|
| Warning |
|---|
Due to the size and weight of the chassis, at least two people are required when lifting, mounting or unmounting the chassis. |
|
Accessory Kit
The Bill of Materials (BOMs) for the
Accessory Kit is:| Caption |
|---|
|
Item Number | Item Description | Quantity |
|---|
| 501-00526 | LUG 2 HOLE, #3-#4 AWG, 90° ANGLE TONGUE, 1/4" STUD HOLE, 1/2"-5/8" HOLE SPACING | 1 | | 401-00119 | CABLE, 9 POS DSUB M-F NULL, MOULDED-3M.-ROHS | 1 | | 510-00038 | | Tooltip |
|---|
| Image Modified |
ESD WRIST STRAP | 1 | | 510-00056 | WASHER, 1/4 SPLIT LOCK STLS STL-ROHS | 2 | | 511-00376 | WASHER, FLAT -1/4 REG STLS STL-ROHS | 2 | | 511-00046 | NUT, HEX 1/4-20 STL STEEL-ROHS | 2 | | 511-00243 | #6 AWG TERMINAL LUG | 4 |
|
| Warning |
|---|
Do not use fan handles when lifting the chassis. |
| Note |
|---|
Carefully remove the contents from the shipping container, and check each item for damage. The is shipped with the items listed below. If any item is missing or damaged, contact your Sonus representative for support. |
Universal Rack Mount Kit
The fixed mount universal rack mount kit consists of:
| Item | Quantity |
|---|
| Fixed Mount Brackets | 2 |
| Rear Mount Support Brackets | 2 |
| 19" Rear Mount Brackets | 2 |
| 23" Rear Mount Brackets | 2 |
| 10-32 X 5/16" flathead Philips screws to affix fixed mount brackets | 6 |
| 10-32 X 5/16" panhead Philips screws to affix rear mount support brackets | 10 |
| 10-32 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| 12-24 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| M5 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| M6 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| 10-32 cage nuts to affix to rack, if appropriate | 12 |
The following figure depicts the contents of the Universal Rack Mount Kit contents.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Universal Rack Mount Kit |
|---|
|
Image Modified |