Page History

...

The EMS uses the EMS CALEA user role for all LI configuration operations from and to the SBC Configurator; the admin user for communicating over netconf to the SBC. The EMS creates the SBC CALEA user credentials automatically when a SBC (including the SBC Configurator) an SBC registers to the EMS. Cloud SBC instances are registered dynamically in the EMS.

Prerequisites

To configure the Call Data Channel (CDC) for a cloud S-SBC instance, accomplish the following:

...

• Instantiate an EMS SWe instance with LI interface support using the EMS_SA_HEAT_TEMPLATE_VERIZON Heat Templatean appropriate Heat template. For more information, refer to to EMS SWe Standalone Instantiation for Geographical Redundancy (GR) Deployment.
• Create a configurator cluster. For more information, refer to Creating an SBC SWe Configurator Cluster.

• Create a configurator instance. For more information, refer to Instantiating SBC Configurator Using non-DHCP Heat Template.

S-SBC Basic Configuration

• Ensure that basic S-SBC configuration

...

Create S-SBC cluster. For more information, refer to Creating an SBC SWe Cluster.

...

Click Configurations tab.

...

Click New Configuration. The New Configuration pane is displayed.

...

Select the version of the configuration from the Version drop-down.

...

Select SBC Configurator instance from the Master Configurator drop-down.
This node is used to create the configuration. The SBC Configurator nodes are displayed based on the version selected. Only unlocked SBC Configurator nodes are listed.

Enter a name for the configuration in the Configuration Name field. The SBC configuration name contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces.

• is completed as in Configuring S-SBC.
• Enable the EMS CALEA user. For information, refer to Enabling Lawful Intercept on EMS Standalone.

...

Click Create.
A circular progress bar is displayed against the Master Configurator node. It takes around six minutes to load master configuration.

...

Click Open Editor. The SBC Configuration Manager window is displayed. 

...

Create the basic S-SBC configuration on the SBC configurator. For information on S-SBC configuration, refer to Creating an SBC SWe Cluster.

...

Click Apply Saved Changes and Close. A circular progress bar is displayed.

...

Anchor

Configuring CDC using EMS CALEA User Account

...

Configuring CDC using EMS CALEA User Account

...

Configuring CDC using the EMS CALEA User Account

...

The LI Call Data Channel must be configured on  the the S-SBC to indicate that it supports interception. For LI, the CDC configuration is performed using the CDC Configuration Manager through the EMS. You can Create create CDC information only as EMS calea when logged in as the EMS CALEA user from the EMS CDC configuration window.

Prerequisites

Enable calea user. For information, refer to Enabling Lawful Intercept on EMS Standalone.

Configure Cluster CDC for Cloud S-SBC

...

Nodes

To configure a cluster CDC for cloud S-SBC nodes, accomplish the following:

1. Log on to EMS as calea userinto EMS as an admin user.
2. Launch the SBC Configuration Manager for the Head End SBC. Refer to Configuring an SBC SWe Cluster using the EMS for more information.
3. Launch another EMS session as the CALEA user.
4. Under Network Mgmnt, click Lawful Intercept. The Lawful Intercept CDC Provisioning window is displayed.

5. Click the Cluster CDC tab. The Cluster CDC pane is displayed.

   Caption
   0 Figure 1 Cluster CDC Tab

   
   The following parameters are displayed: 

   Caption
   0 Table 1 Cluster Configuration Parameters
   Parameter Description Locked Configuration Specifies the configuration name. Configuration Role Specifies the type of the configuration role. The roles are Default and Alternate. Cluster Specifies the name of the cluster. Master Configurator Specifies the name of the locked master configurator instance.

6. Select the S-SBC cluster with locked configurator node.

7. Click Launch CDC Configuration Manager. The SBC Configuration Manager window is displayed. 

   Caption
   0 Figure 1 Launch CDC Configuration Manager

8. Create a call data channel . For more information, see (Proceed to Creating Call Data Channel for S-SBC below).

Anchor
Creating Call Data Channel for S-SBC

...

Creating Call Data Channel for S-SBC

Creating a Call Data Channel for the S-SBC

To create a new Call Data Channelcall data channel:

1. In the SBC Configuration Manager window, navigate to Configuration > Intercept > Call Data Channel. The Call Data Channel window is displayed.

   Caption
   0 Figure 1 Call Data Channel for S-SBC

   note

   Info
   title Note:
   You can configure the configure LI using the default Address Context only.

2. Select default from the Address Context drop-down menu.

   Caption
   0 Figure 1 Call Data Channel for M-SBC

3. Click New Call Data Channel. The Create New Call Data Channel window is displayed.

   Note
   You can configure the LI using the default Address Context only.

4. Specify the following values:

   1. Name: Type the Enter a name of the call data channelfor the CDC configuration object.

   2. Intercept Standard: Select packetcable from the drop-down menu.

   3. Vendor ID: Select ss8 from the drop-down menu.

      Caption
      0 Figure 1 Create CDC

      Caption
      0 Table 1 Call Data Channel Parameters 3 Parameter Details
      Parameter Description Name Specifies the name of the CDC configuration object. Intercept Standard Specifies the intercept standard usedto use. Vendor Id Specifies the vendor of the LI server used.

5. Click Save. The object is created successfully.

6. Click OK. Caption

   0	Figure
   1	Call Data Channel List

   Image Removed

    

7. Click Apply Saved Changes and Close.

8.  Activate the CDC configuration. For more information, see Activating CDC Configuration for S-SBC.

Activating CDC Configuration for S-SBC

To activate a cluster configuration for SBC SWe, accomplish the following:

1. Log on to EMS as admin user.
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Select S-SBC cluster for which the CDC configuration is created. 

4. Click Configuration tab.  The Configuration pane is displayed.

   Caption
   0 Figure 1 Configuration Pane 3 Configuration Pane
   Image Removed

    

5. In Configuration Role column, select the configuration role to activate.

6. Click Activate Configuration. The Activation in progress status is displayed. When the activation is completed, the nodes in the cluster are updated with the active configuration, the Configuration Status is displayed as Last update complete.

7. Instantiate S-SBC instance. For more information, see Instantiating S-SBC Instance.

...

1. Click Save at the top of the SBC Configuration Manager window when you have completed making configuration changes. When prompted, confirm that you want to save all your changes and push the configuration to all nodes in the cluster. 

2. Return to the EMS session containing the SBC Configuration Manager for the Head End SBC and click Save and Activate.