Initially, when authentication is enabled, at least one method should be enabled. If both of them are enabled, the external (RADIUS) authentication will be tried first. If this fails, SBC will the
will fall back and try local authentication. The login attempt will be rejected if both the attempts failed.
On SBC main the
main screen, go to
Administration >
Accounting and Logs >
Radius Authentication. The Radius Authentication window is displayed.
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Radius Authentication Parameters |
|---|
|
Parameter | Description |
|---|
Radius Server Ip
| Specifies the remote Radius server IP used for authentication. | Radius Server Port
| Specifies the port on which RADIUS server is listening for authentication requests. | Radius Nas Ip
| Specifies the IP address of the network access server (NAS) which is requesting for authentication. This is usually the management IP. | Radius Shared Secret
| Specifies the shared secret key between the RADIUS server and the SBC . This should be configured same as the key configured in the RADIUS server. The value ranges from 8 - 128 characters and the default value is 123456789abcdef0. |
|
Click Save to save the changes made.
Additional topics in this section:
| Div |
|---|
| style | padding-left:2%; |
|---|
| id | indent |
|---|
|
|
| Include Page |
|---|
| Radius_auth_users |
|---|
| Radius_auth_users |
|---|
|