...
Use this feature to configure the target whose media is captured with the Media Capture Tool (MCT) and sent to the monitoring server.
| Info |
|---|
Access to the Media Capture Tool is restricted to privileged, password-protected user accounts. Tracking of its use is tracked by AUD logging. |
Command Syntax
| Code Block |
|---|
|
% set global monitorTarget <target_name>
duration <1-65535>
gcid <0-2147483647>
monitorEndpoint <endpoint name>
monitorLeg <all | both | egress | ingress>
state <disabled | enabled> |
Command Parameters
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Global Monitor Target Parameters |
|---|
|
Parameter | Length/Range | Description |
|---|
|
...
monitorTarget
...
N/A
Use this control to configure monitor target settings.
...
<target name> | 1-23 characters | The target name. | duration | 1-65535 | <value> (Default = 0) |
|
...
| – The duration (in seconds) that the monitor target is tapped. |
|
...
| gcid | 0-2147483647 | <value> – The target GCID (Global Call Identifier) to tap |
|
...
| . | monitorEndpoint | 1-23 characters | <endpoint name> – Name of endpoint to use for recording. | monitorLeg |
|
...
| N/A | Specifies which leg to tap: all – All four legs in GW-GW network
|
|
...
...
- (default) – Both ingress and ingress leg
|
|
...
egress – Egress leg onlyingress – Ingress leg only
| state
|
|
...
| N/A | Administrative state of the monitor target: disabled (default)enabled
|
|
Command Example
| Code Block |
|---|
|
% set global monitorTarget mciTarget duration 1000 gcid 100 monitorEndpoint MyEndpoint monitorLeg both state |
...