Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
CSS Stylesheet
img.confluence-embedded-image { display: inline-block !important; }

add_workflow_docset_workflow
APPRJIDSYM-21010
AUTH1DEV1LDEV1SVT1LSVT1
AUTHJIDSYM-20480
 
for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
JIRAIDAUTHCHOR-742
REV5UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c85500c9, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca91048d, userName='null'}

Panel

In this section:

Table of Contents
maxLevel3

...

Info

The third Ethernet port on the SBC 1000 is available only if running SBC 1000 v2 hardware. For hardware details, see Sonus Ribbon SBC 1000 Hardware Specifications.

Warning
The Administrative IP port (available on the SBC 2000 only),should only be used for Running Initial Setup and disconnected when not in use (especially to avoid conflicts with your network). This interface cannot be used for VOIP media or protocols.
Note
iconfalse

Note: The functionality of enabling and disabling system created logical interfaces (e.g. Ethernet 1, Ethernet 2, etc.) is available on the Sonus

Spacevars
0company
SBC 2000 only. Enabling and disabling VLAN logical interfaces can be done on all platforms.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies the IP address mode that is assigned for that Logical Interface. Determines if the interface is IPv4, IPv6, or both. Valid entry: IPv4, IPv6 or Both. Default entry: IPv4. Depending on the mode selected, specific configuration fields are displayed; these are noted where applicable.

Pagebreak

VLAN tag

Panel
bgColor#FAFAFA
borderStylenone

Note: This field is for SBC SWe Lite only.

The VLAN tag is a value assigned for the sub-interface.

Networking - IPv4 Options

...

Warning

Each logical interface can have a primary IP address and a secondary IP address. The secondary IP address is useful for WebUI or Sonus Ribbon SBC Edge API User's Guide operations only, and should not be used for VOIP media or protocols such as SIP, RTP and SRTP.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies how the IP address is assigned for that interface. Select from the drop down box. Available options: Static (User configured IPv4 address, netmask and system network configuration) or DHCP (Automatically acquired IPv4 address, netmask, and other system network configuration).

Note: DHCP applies to IPv4 addresses only; IPv6 addresses must be statically configured.

If you are configuring the IP Assign method from DHCP to Static, you should add a new default static route. We recommend this be done through the Modify Ethernet IP task (this allows you to set the IP address and the default route in one step). See Modifying the Sonus SBC 1000 IP Address and Modifying the Sonus SBC 2000 IP Address.

WARNING: If you set the IP Assign method to DHCP, the DNS server(s), NTP server(s), domain name and the default IP Route will be overwritten and configured dynamically. 

Pagebreak

Primary Address

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Primary IP Address through which the Sonus

Spacevars
0company
SBC 1000/2000 communicates over Ethernet, and by which the application may be accessed. This field is available only when the IP Assign Method field is set to Static.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Secondary IP Address through which the Sonus

Spacevars
0company
SBC 1000/2000 communicates over Ethernet, and by which the application may be accessed. This field is available only when the Configure Secondary Interface field is set to Enabled.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifics whether a Split DNS should automatically be created using parameters supplied by the DHCP server.

Available options:

  • Enabled: Enables Split DNS to be created from each combination of domain-name and DNS server supplied by the DHCP server. When the DHCP-lease expires, the Split DNS settings are automatically removed.
  • Disabled: Disables Split DNS and uses DHCP parameters as global settings. When the DHCP-lease expires, the Split DNS settings are removed.

This field is available only when the DHCP Options to Use field is set to IP Address and DNS.

Pagebreak

Next Hop Media IP

Panel
bgColor#FAFAFA
borderStylenone

Specifies the gateway to use for media calls traversing through that interface.

Networking - IPv6 Options

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies the primary IPv6 network prefix length for the interface through which the SBC 1000/2000 communicates over Ethernet. Valid entry 1 - 127. Default value: 64. 

Next Hop Media IP

Panel
bgColor#FAFAFA
borderStylenone

Specifies the gateway to use for media calls traversing through that interface.

Pagebreak