Specifies the treatment taken when the modem tone is detected.
To View and Edit Modem
On SBC main the
main screen, go to
Configuration >
Profile Management >
Category: Media Profiles >
Codec Entry >
Modem.
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Codec Entry - Modem Parameters |
|---|
|
Parameter | Description |
|---|
Failure
Handing
| Specifies the behavior when a modem tone is detected but the treatment fails for any reason. The behavior can be: • Disconnect—Release the call.
• Continue—Continue to process the call.
The default setting is Continue. | Tone Treatment
| Specifies the treatment taken when the modem tone is detected, which can be: • none—Do nothing when the modem tone is detected.
• notifyPeer—Notify the peer when the modem tone is detected.
• disconnect—Disconnect the call when the modem tone is detected.
• fallbackToG711—Fall back to G.711 when the modem tone is detected.
• applyFaxTreatment—Treat the modem tone as a fax tone, and apply the fax treatment for the selected codec.
The default setting is None. |
|
| Note |
|---|
|
For G.711 calls, Notify Peer and Disconnect require a compression resource be allocated. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.