Page History

Configuring PSX FQDN as Remote Policy Server

This section explains the prerequisites and the configurations to be done on the SBC Configurator

Spacevars
0 product

 Configurator and PSX Manager so that the SBC has

Spacevars
0 product

 has the view of the PSX cluster and the PSX has the view of the SBC cluster

Spacevars
0 product

 cluster. It also explains the configuration steps in SBC Configurator the

Spacevars
0 product

 Configurator to add the FQDN and PSX Manager to set the SBC clusters

Spacevars
0 product

 clusters as gateways.

Prerequisites

• EMS instance should be is up and running.
• PSX Master instance should be is up and running.SBC Configurator should be

• Spacevars
  0 product

   Configurator is up and running.

SBC Configuration

The PSX instances within a cluster must be visible to the instances within the SBC cluster

Spacevars
0 product

 cluster. When a new instance is created, it will query the PSX using FQDN. Registering the PSX cluster FQDN in the Remote Policy Server instead of the IP address in the configurator manager allows the SBC to

Spacevars
0 product

 to have a view of the PSX instances within the cluster.

The configurations done made in the Configurator node is are passed on to all SBC nodes

Spacevars
0 product

 nodes in the cluster. To know how to configure SBC clusters configure

Spacevars
0 product

 clusters as gateways in the PSX SWe Manager, refer to "Configuring SBC Cluster ID as Gateway" in the PSX documentation. 

Pagebreak

Configuring the Remote Policy Server in SBC

...

1. Log on to the EMS SWe and open the Cluster/VNF Management.

2. Create a cluster for SBC SWe

   Spacevars
   0 product2

   . Select the created cluster and click on Click the Configurations tab. The following screen appears:

   Caption
   0 Figure 1 Cluster/VNF Management
   Image Modified

3. Click on New Configuration. The following screen appears:

   Caption
   0 Figure 1 SBC Manager Home Page
   Image Modified

   
   The details of the Configurator is visible when the Configurator instance is spawned through HEAT Template on Openstack OpenStack as well as Application Orchestrator in EMS.
   
   

4. Click Create. The following screen appears:

   Caption
   0 Figure 1 SBC SWe Configuration Create
   Image Modified Image Modified

5. Click Open Editor and the . The SBC Configurator 's GUI is seen as belowdisplayed:

   Caption
   0 Figure 1 SBC Configuration Manager Home Page
   Image Modified

6. Navigate through All > System > PolicyServer > LocalServer. Select the PSX_LOCAL_SERVER. Change the State to Disabled and Mode as Out of Service.

7. Click Save.
   

   Caption
   0 Figure 1 Local Server
   Image Modified

8. The created Local Server is displayed.

   Caption
   0 Figure 1 Created Local Server
   Image Modified

   pagebreak

9. Navigate through All > System > Policy Server > Remote Policy Server. The following screen appears:

   Caption
   0 Figure 1 Remote Policy Server
   Image Modified

10. Click New Remote Server and add the required values, for example:

    1. Enter Name as Cluster name (PSX_15).

    2. Enter FQDN of PSX Cluster, for example "psx2.sonusnet.com".

    3. Check the radio button for Enabled.

    4. Change the Mode to Standby.

       Caption
       0 Figure 1 Remote Policy Server Values
       Image Modified

    5. Click Save.

       Caption
       0 Figure 1 Remote Policy Server List
       Image Modified

       note

    6. Create another Remoter Server with the following details:

       • Name: PSX_14
       • FQDN:
       For example
       • psx1.sonusnet.com (example)
       • Mode: Active

The PSX Master cluster FQDN is added to the SBC Configurator.

...

Info
title Note
You

...

can configure either the FQDN or IP address, but not both. maxPolicyServerCount is the number of IP addresses

...

the SBC picks and registers with from the FQDN resolution result. The default value is 1.

Pagebreak

...