...
| borderColor | green |
|---|
| bgColor | transparent |
|---|
| borderWidth | 2 |
|---|
Back to Table of Contents
Back to CLI System-Level Mode
Back to show Command Details
...
Command
...
Syntax
The command syntax of the objects related to the show table alarmscommand is shown below (see “show status alarms” for parameter details).
| Note |
|---|
|
| When viewing alarms from the CLI, the alarm timestamp is Greenwich Mean Time (GMT) regardless of the time zone set on the system. |
| Code Block |
|---|
|
> show table alarms
currentStatus <alarm Id>
clearType
desc
reporter
severity
timestamp
historyStatus <alarm Id>
desc
reporter
severity
state
timestamp |
Command Parameters
Length/Range| Descriptions | | 3 | Alarms Parameter Descriptions |
|---|
|
Parameter | Description |
|---|
currentStatus |
|
N/A | Displays status of current outstanding alarms. <alarm Id>clearType – Type of clear: AUTOMATIC or MANUAL.desc – Alarm description.reporter – Name of the task reporting this Alarm.severity – Alarm severity.timestamp – Time when the alarm was raised.
| historyStatus |
|
N/A | Displays history of alarms depending upon options selected. <alarm Id> – Alarm identifier.desc – Alarm description.reporter – Name of task reporting alarm.severity – Alarm severity.state – Alarm state (SET, CLEAR OR MAN CLR).timestamp – Timestamp when the alarm was raised.
|
|
Command Example
| Code Block |
|---|
|
admin@WFDSBC01a> show table alarms historyStatus
ALARM
ID TIMESTAMP STATE DESC
---------------------------------------------------------
1 2013-04-30T20:08:09 CLEAR Local server WFDSBC01a: NTP peer server IP address 10.128.254.67 is Inservice, waiting to synchronize
2 2013-04-30T20:08:16 SET High Availability port down: ceName = WFDSBC01a, portName = haPort1
3 2013-04-30T20:08:16 CLEAR High Availability port up: ceName = WFDSBC01a, portName = haPort2
4 2013-04-30T20:08:16 CLEAR Node: WFDSBC01 active after boot
5 2013-04-30T20:08:17 CLEAR High Availability port up: ceName = WFDSBC01a, portName = haPort1
6 2013-04-30T20:08:22 CLEAR Config and Policy databases are in sync on system: WFDSBC01, server: WFDSBC01a, role: active
7 2013-04-30T20:08:23 CLEAR Policy server communication to LWRESD is UP.
8 2013-04-30T20:08:26 CLEAR Packet port pkt0 on CE WFDSBC01a slot 0 with ifIndex 9 is UP
9 2013-04-30T20:08:27 CLEAR Packet port pkt1 on CE WFDSBC01a slot 0 with ifIndex 10 is UP
10 2013-04-30T20:08:28 CLEAR Packet port pkt2 on CE WFDSBC01a slot 0 with ifIndex 11 is UP
11 2013-04-30T20:08:29 CLEAR Packet port pkt3 on CE WFDSBC01a slot 0 with ifIndex 12 is UP |