Noprint | |||||||||
---|---|---|---|---|---|---|---|---|---|
|
...
width | 24px |
---|
Add_workflow_for_techpubs | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
Panel | ||||||
---|---|---|---|---|---|---|
In this section:
|
This section contains site planning and requirements information for installing the
Spacevars | ||
---|---|---|
|
The following table lists the environmental requirements of
Spacevars | ||
---|---|---|
|
Caption | ||||
---|---|---|---|---|
| ||||
Item | Requirement |
---|---|
SBC 7000 |
...
Dimensions |
|
...
| |
Rack Space |
|
...
|
...
| |
Server Access Clearance | A minimum |
...
36-inch clearance in |
...
front of and |
...
behind the chassis. | |
Humidity | Short-Term Operating
|
...
NOTE: Short- |
...
term is defined as 96 consecutive hours or less, and not more than 15 days in |
...
12 months. |
Full-Term Operating
|
Non-operating
|
...
|
...
| |
Temperature | Operating |
...
41° F to |
...
104° F ( |
...
5° C to |
...
40° C) up to |
...
6,000 feet ( |
...
1,829 meters) |
...
term: |
...
28° F to |
...
131° F (- |
...
5° C to |
...
55° C) up to |
...
6,000 feet ( |
...
1,829 meters). |
...
NOTE: Short- |
...
term is defined as 96 consecutive hours or less and not more than 15 days in |
...
12 months. |
...
Non-Operating - |
...
40° F to |
...
158° F (- |
...
40° C to |
...
70° C) | |
Elevation | Operating -197 feet to |
...
6,000 feet (-60 to |
...
1,800 meters) at |
...
104° F ( |
...
40° C). |
...
5,900 feet to |
...
13,100 feet ( |
...
1,800 to 4,000 meters) at |
...
86° F ( |
...
30° C) | |
Vibration profiles | Operating 0.1G, 5- |
...
100 Hz, 0.1 |
...
octave/ |
...
minute |
...
octave/ |
...
minute |
Non-operating |
...
3 dB/octave |
...
The following table lists the
Spacevars | ||
---|---|---|
|
Note | ||||
---|---|---|---|---|
Prior to connecting to the DC power source, connect the (earth) ground at both the designated grounding terminals on the
|
Caption | ||||||
---|---|---|---|---|---|---|
| ||||||
|
...
|
...
...
|
...
|
...
...
|
...
|
...
|
...
|
...
|
Note | ||
---|---|---|
| ||
Note SBCs shipped with AC power supplies include a customer-selectable, country-specific power cord that is chosen during the system quoting process. The example above is a North American power cord (20 amp 250 volt NEMA L6-20P to IEC C19 connector), which is one of the selections. |
Warning | ||||
---|---|---|---|---|
| ||||
For the DC-powered |
...
100 A (recommended rating is |
...
80 A) to protect against excess currents, short circuits, and earth faults in accordance to national and/or local codes. |
Note | ||
---|---|---|
| ||
Prior to connecting to the DC power source, connect the (earth) ground at both the designated grounding terminals on the SBC 7000 chassis and at the facility wiring side of the DC supply. |
...
...
Bonded to a grounding system utilizing either an Isolated Bonding Network (Isolated Ground) or a Common Bonding Network (Integrated Ground).
A
...
higher amperage AC connector is used
...
which is different than a normal AC
...
connectors to power the
. The connector pin orientation of this higher amperage AC Spacevars 0 series2
...
connector is shown below.
Caption | ||||
---|---|---|---|---|
|
...