This section helps you to understand EgressUse this window to configure egress-specific call admission control (CAC) configuration for the SIP trunk group.
...
a shared CAC limits pool.
On the SBC main screen, go to All > Global > Cac > Shared Cac > CAC > Shared CAC Limits Pool > > Egress.
Select the desired Shared Cac CAC Limits Pools from the drop-down list to view its respective Egress parameters.
Caption |
---|
0 | Figure |
---|
1 | Global - Cac - Shared Cac Limits Pool - Egress Main Field |
---|
|
Image Removed |
The . The Egress window is displayed.
Caption |
---|
0 | Figure |
---|
1 | Global - Cac - Shared Cac CAC Limits Pool - Egress |
---|
| Image Removed
Image Added |
Include Page |
---|
| _Subscribe_CAC_Access_Restriction |
---|
| _Subscribe_CAC_Access_Restriction |
---|
|
Use the following table to configure the options and then click Save.The following fields are displayed:
Caption |
---|
0 | Table |
---|
1 | Cac - Shared Cac CAC Limits Pool - Egress Parameters |
---|
|
Parameter | Description |
---|
Call Rate Max | Specifies the maximum sustained egress call rate allowed in calls per second. | (range200 or . range: 1-450, or unlimited. range 1350 or . Note |
---|
Note: You can set both “callBurstMax” and “ CallRateMax ” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value. | Call Burst Max | Specifies the maximum allowed burst size (above the allowed sustained rate) for egress call attempts, in calls per second. | (range900 or unlimited.unlimited (SBC 7000 range is 1- | 2700 or . | Register Rate Max | Specifies the maximum sustained egress rate (registrations per second) of initial SIP registrations allowed. | (range1000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . Note | You Note: You can set both “registerBurstMax ” and “registerRateMax ” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value. | Register Burst Max | Specifies the maximum allowed burst (above the allowed sustained rate) for egress initial SIP registrations. | (range1000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . | Subscribe Rate Max | Specifies the maximum sustained egress rate (subscribes per second) of initial SIP subscribe request. | (range1000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . | Subscribe Burst Max | Specifies the maximum allowed burst (above the allowed sustained rate) for egress initial SIP subscribe request. | (range1000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . | Other Req Rate Max | Specifies the maximum sustained egress rate (requests per second) of other out-of-dialog SIP requests. | (range1000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . | Other Req Burst Max | Specifies the maximum allowed burst (above the allowed sustained rate) for any other egress out-of-dialog SIP request. | (range 11000 or unlimited.unlimited (SBC 7000 range is 1- | 3000 or . |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.