Page History

IN PROCESS

The instructions below outline how to The SWe Lite supports up to 4 vCPUs and 4 Gib of RAM (memory). To increase the number of vCPUs and memory in the SWe Lite system after initial installation, edit the VM settings and reboot. See instructions below, according to the installation type.

...

increase memory on your VM instance, according to deployment type. In Release 7.0, the SWe Lite supports the following:

Adding vCPUs and Increasing RAM

SWe Lite on KVM Hypervisor

1. Login into a terminal access software (such as Putty), and log into the KVM server.
2. Start the Virtual Machine Manager.
3. From the list, click on the applicable VM instance.
4. Power down the VM.
5. Select Edit > Virtual Machine Details
6. Select View > Details or click the Image Addedicon

7. From the menu, click CPUs.The SWe Lite supports 1, 2, or 4 vCPUs. 

   Caption
   0 Figure 1 Add vCPUs
   Image Added

8. Click Apply.

9. From the menu, click Memory. Each SWe Lite instance with 1 vCPU requires 1 GiB (1024 MiB) RAM; this amount is increased according to the number of vCPUs. Refer to SBC SWe Lite Hardware and Software Requirements.

   Caption
   0 Figure 1 Update Memory
   Image Added

10. Click Apply.
11. Start the VM instance. The SWe Lite is configured with the updated values.

To verify the updated values, see Verify Update on SWe Lite.

...

Access the desired VM with the desired SWe Lite instance.

Click Edit virtual matchine settings

In Memory Size, update the amount of memory.

Change the number of vCPUs...

Reboot the VM.

Continue on with Running Initial Setup?

SWe Lite on VMware ESXi

Add a vCPU and increase RAM on the VM instance as following:

1. Access vSphere Client.
2. Click on the applicable VM instance
3. Power down the VM.
4. From the Getting Started tab, click Edit virtual machine settings.

5. From the Hardware tab, click Memory.

    

   Caption
   0 Figure 1 Add Memory
   Image Added

6. Update the desired memory size. Each SWe Lite instance with 1 vCPU requires 1 GiB (1024 MiB) RAM; this amount is increased according to the number of vCPUs. Refer to SBC SWe Lite Hardware and Software Requirements.

7. From the Hardware tab, click CPUs.

   Caption
   0 Figure 1 Add vCPUs
   Image Added

8. Update the desired number of vCPUs. The SWe Lite supports 1, 2, or 4 vCPUs.
9. Click OK.
10. Start the VM instance. The SWe Lite is configured with the updated values.

To verify the updated values, see Verify Update on SWe Lite.

Verify Update on SWe Lite

1. Connect to the applicable SWe.
2. In the WebUI, access System > Overview.
3. Verify the number of Virtual CPUs and Total System Memory.

...