Page History

Include Page
Not_for_SWe Not_for_SWe

For the

Spacevars
0 longproduct

 to For the Sonus SBC 1000/2000 to function as a DHCP server, it must be enabled and have a DHCP pool configured on the at least one of its interfaces. The Sonus SBC 1000/2000 will only perform

Spacevars
0 longproduct

 only performs DHCP server functionality on those interfaces that have a DHCP pool associated with them.

The Sonus SBC 1000/2000 DHCP

Spacevars
0 longproduct

 DHCP Server supports serving up to a maximum of 20 address pools. A DHCP pool typically consists of a name, an IP address range, netmask, default router, and other various network parameters, allowing the Sonus SBC 1000/2000 to

Spacevars
0 longproduct

 to serve as a DHCP server to multiple connected subnets. It also allows the Sonus SBC 1000/2000 to

Spacevars
0 longproduct

 to provide different DHCP parameters to different pools of clients (e.g. SIP phones, engineering workstations, VPN users, etc.).

Info
The SBC supports IPv4 addresses for this feature; IPv6 is not supported.

To create or to modify an existing DHCP Pool:

1. In the WebUI, click the Settings tab.

2. From the left navigation pane, go to Protocols > IP > DHCP > Pools.

Panel
borderStyle none
Caption 0 Figure 1 DHCP Pools Image Modified

 

Modifying a DHCP Pool

Include Page
_Modify_Entry _Modify_Entry nopanel true

...

Include Page
_Disable_Entry _Disable_Entry nopanel true

Creating a DHCP Pool

From the DHCP Pools window, click on the ( Image Modified) at the top of the screen.

Panel
borderStyle none
Caption 0 Figure 1 Create DHCP Pool Entry Image Modified

 

Pool Attributes - Field Definitions

...

Vendor Options allows the Sonus SBC 1000/2000 to

Spacevars
0 longproduct

 to provide vendor parameters for different pools of clients (i.e, SIP phones, engineering workstations, VPN users, etc.). The configuration values are specific to the phone or device being configured. For valid values, consult the manual that accompanied the phone/device.

...

Expand
title Click here for example
Pool Attribute Configuration - Example Below is an example configuration for a Polycom (CX500) phone. Follow the initial instructions for Creating and Modifying DHCP Pools and configure as shown below. These fields must be configured before the Vendor specific configuration below. Panel borderStyle none Caption 0 Figure 1 Pool Attribute Configuration Image Modified   Vendor Specific Configuration Image Removed  Panel borderStyle none Caption 0 Figure 1 Vendor Specific Information Image Added

Vendor Specific Information - Field Definitions

...

Panel
bgColor #FAFAFA borderStyle none
Specifies the Vendor-Identifying Vendor Option data to be sent. A valid entry can be either an ascii string of the attribute or a hex string in the aa:bb:cc format. Maximum length: 64 characters.

  

Pagebreak