add_docset_workflowworkflow_for_techpubs | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the IP address mode that is assigned for that Logical Interface. Determines if the interface is IPv4, IPv6, or both. Valid entry: IPv4, IPv6 or Both. Default entry: IPv4. Depending on the mode selected, specific configuration fields are displayed; these are noted where applicable. |
Panel | ||||
---|---|---|---|---|
| ||||
Note: This field is for SBC SWe Lite only. The VLAN tag is a value assigned for the sub-interface. |
...
Warning |
---|
Each logical interface can have a primary IP address and a secondary IP address. The secondary IP address is useful for WebUI or Sonus SBC Edge API User's Guide operations only, and should not be used for VOIP media or protocols such as SIP, RTP and SRTP. |
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifics whether a Split DNS should automatically be created using parameters supplied by the DHCP server. Available options:
This field is available only when the DHCP Options to Use field is set to IP Address and DNS. |
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the gateway to use for media calls traversing through that interface. |
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the primary IPv6 network prefix length for the interface through which the SBC 1000/2000 communicates over Ethernet. Valid entry 1 - 127. Default value: 64. |
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the gateway to use for media calls traversing through that interface. |