Page History

...

• Lync Pool Name: cspool.mxlync.com
• Primary Sonus SBC 1000/2000: testux212.mslync.com
• Secondary Sonus SBC 1000/2000: testux226.mslync.com

Primary Sonus SBC 1000/2000 Configuration

After successfully running the wizard, a primary Sonus SBC 1000/2000 is configured for Lync 2010 Interoperability as shown below.

Secondary Sonus SBC 1000/2000 Configuration

After successfully running the wizard, a secondary Sonus SBC 1000/2000 is configured for Lync 2010 Interoperability as shown below.

LYNC Topology Configuration

...

1. Use Remote Desktop to connect to the Lync Front End Server.
2. Launch the Topology Builder.
3. In the left pane, right-click on PSTN gateways.

4. Select Define New Gatewayto add the secondary Sonus SBC 1000/2000 gateway as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Define Gateway Image Modified

    

    

Associating the Gateway with a Mediation Server

...

1. Use Remote Desktop to connect to the Lync Front End Server.
2. Launch the Topology Builder.
3. In the left pane select Mediation pools > relevant pool.
4. Right-click, then select Edit to open its properties.
5. Select the newly added Sonus SBC 1000/2000 gateway from the list.

6. Click Add...to associate it with the Mediation Server as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Associate With Mediation Server Image Modified

7. Use Remote Desktop to connect to the Lync Front End Server.
8. Launch the Topology Builder.
9. Right-click on Lync Server 2010 in left pane.

10. Select Publish Topology...as shown below.

    Panel
    borderStyle none
    Caption 0 Figure 1 Publish Topology Image Modified

Configuring the LYNC Voice Routing

...

1. Open the LYNC Server 2010configuration page:
   1. Enter the URL of the Front-End pool (https://<fqdn of the front end pool>/cscp).
2. Click Voice Routing in the left pane.
3. Click Voice Policy in the right pane.

4. Double-click the relevant policy_ in the list.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Relevant Policy Image Modified

    

    

5. Double click the relevant PSTN usage record.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Relevant PSTN Usage Record Image Modified

    

    

6. Double Click on the Route entry.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Route Entry Image Modified

7. Add the secondary Sonus SBC 1000/2000 gateway into Associated Gateways list

   Panel
   borderStyle none
   Caption 0 Figure 1 Add Secondary Sonus SBC 1000/2000 Gateway Image Modified

   
   

    

8. Click OK, OK, and OK to exit out of the Voice Policy configuration.