Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|
ServerLookup | Yes | No | Enum | 0 | Possible values: - 0 - eLkUpIpFQDN
- 1 - eLkUpSRV
| Specifies the method to use to lookup SIP servers - IP/FQDN
- Do a typical DNS lookup of FQDN. - DNS SRV
- Send an SRV record to DNS server then upon reply lookup FQDN's via DNS. A maximum of 99 entries can be added to this table entry. When added via REST any Row ID greater than 99 will be rejected. |
---|
ServerType | Yes | No | Enum | 0 | Possible values: - 0 - eConventionalSrvr
- 1 - eSrvRecordTemplateSrvr
- 2 - eSrvRecordSrvr
| Specifies the method to use to lookup SIP servers - eConventionalSrvr
- A configured server entry defined by IP or FQDN. - eSrvRecordTemplateSrvr
- This is not an actual server but a template which will populate the server(s) once the SRV Query gets a response from DNS. - eSrvRecordSrvr
- The actual server created after SRV Query.
|
---|
Weight | Yes | No | int | 0 | Possible values: - 0 - Minimum
- 65535 - Maximum
| Specifies the weight of the server in case it's defined in the SRV record. |
---|
Host | Yes | No | string | none | 256 - Max Length | Specifies the IP address or FQDN where this Signaling Group sends SIP messages. If an FQDN is configured all the associated servers are included and used according to the server selection configuration element. |
---|
HostIpVersion | Yes | No | Enum | 0 | Possible values: - 0 - eVersionPreferIPv4
- 1 - eVersionPreferIPv6
| Specifies whether the FQDN should be resolved into IPv4 addresses or IPv6 addresses. If this is a SRV record, this field specifies whether the resulting FQDNs are resolved into IPv4 or IPv6 addresses. By default, SBC resolves the FQDN into IPv4 addresses. |
---|
DomainName | Yes | No | string | none | 256 - Max Length | Specifies the Domain where this Signaling Group sends SRV queries. |
---|
ServiceName | No | No | string | sip | 64 - Max Length | The name of the service to be placed in the SRV request. |
---|
Port | Yes | Yes | int | 5060 | Possible values: - 1024 - Minimum
- 65535 - Maximum
| Specifies the port number to send SIP messages. |
---|
TransportSocket | No | No | int | 0 | Possible values: | Specifies number of re-usable sockets Info |
---|
This option is available when ReuseTransport is set to True. When ReuseTransport is false, this needs to be set to 0 |
|
---|
ReuseTransport | No | No | Enum | 1 | Possible values: | Specifies whether sockets will be reused or shared. Only valid for TCP or TLS |
---|
ReuseTimeout | No | No | int | 1000 | Possible values: - 0 - Minimum
- 1440 - Maximum
| Specifies the number of minutes that a socket remains connected to the server. Info |
---|
This option is available when ReuseTransport is Enabled. A value of 0 means ReuseTimeout is set Forever*. Otherwise, the valid range is 5-1440 |
|
---|
Protocol | Yes | No | Enum | 1 | Possible values: - 0 - eTrNone
- 1 - eTrUDP
- 2 - eTrTCP
- 3 - eTrTCP_UDP
- 4 - eTrTLS
- 5 - eTrTLS_UDP
- 6 - eTrTLS_TCP
- 7 - eTrTLS_TCP_UDP
- 8 - eTrCount
- 9 - eTrSCTP
| Specifies the protocol to use for sending SIP messages - UDP
- Send messages using UDP. - TCP
- Send message using TCP. - TLS
- Send message using TLS.
|
---|
Monitor | No | No | Enum | 0 | Possible values: - 0 - eMonitorNone
- 1 - eMonitorOptions
- 2 - eMonitorPing
| Specifies the method to monitor server - None
- no monitoring of this server occurs - SIP options
- an Options message is sent to the server
|
---|
KeepAliveFrequency | No | No | int | 30 | Possible values: | Specify frequency in seconds to determine server availability. Info |
---|
This configuration is available when Monitor is set to SIP Options . If Monitor is not set to SIP Options, this value needs to be 0. Otherwise, this value needs to be in the range 30-300* |
|
---|
RecoverFrequency | No | No | int | 5 | Possible values: | Specify frequency in seconds to check server to determine whether it has become available. Info |
---|
This configuration is available when Monitor is set to SIP Options . If Monitor is not set to SIP Options, this value needs to be 0. Otherwise, this value needs to be in the range 5-300* |
|
---|
LocalUserName | No | No | string | Anonymous | 64 - Max Length | The local username of the Sonus SBC |
---|