Page Tree | ||
---|---|---|
|
Modifies a Routing Table Entry given a specific Table Entry ID in a given Routing Table.
https://134.56.227.163/rest/routingtable/{identifier}/routingentry/{identifier}
POST
true
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description | ||
---|---|---|---|---|---|---|---|---|
ConfigIEState | No | Yes | Enum | 1 | Possible values:
| Specifies the Administrative State of the resource. | ||
TransformationTable | Yes | No | int | 1 | Possible values:
| Sets the Transformation table to use for this call route. | ||
RoutePriority | Yes | No | int | 1 | Possible values:
| Priority of the route, 1 is the highest, 10 the lowest. Higher priority routes are matched against before lower priority routes regardless of the order of the routes in the table. | ||
CallPriority | Yes | No | Enum | 1 | Possible values:
| Priority of the call. Used for emergency call identification by dial plan in routing table | ||
QualityMetricCalls | Yes | No | int | 10 | Possible values:
| Specifies the number of calls over which the quality metrics are calculated. | ||
QualityMetricTime | Yes | No | int | 10 | Possible values:
| Specifies the time in minutes after which a route is tried again after failing quality metrics. | ||
QualityMinASRThreshold | Yes | No | int | 0 | Possible values:
| Specifies the minimum answer/seizure ratio for this rule to be considered for use. | ||
QualityMaxRoundTripDelayThreshold | No | No | int | 65535 | Possible values:
| Specifies the maximum average round trip (R/T) delay for this rule to be considered for use. | ||
QualityMaxJitterThreshold | No | No | int | 3000 | Possible values:
| Specifies the maximum average jitter for this rule to be considered for use. | ||
QualityMinLQMOSThreshold | No | No | int | 0 | Possible values:
| Specifies the minimum average MOS (mean opinion score) value for this rule to be considered for use, in tenths (e.g.: "2.5" is configured as "25"). Setting this value to 0 disables the Minimum MOS threshold. Otherwise, the allowed values are between 10 and 50 (1.0 - 5.0). | ||
DestinationType | Yes | No | Enum | 0 | Possible values:
| Specifies the type of destination for calls. | ||
DenyCauseCode | No | No | int | 16 | Possible values:
| Specifies the cause code to use for Deny type destionations. | ||
MediaSelection | No | No | int | 0 | Possible values:
| Specifies the Media List Profile to use for this Call Route. | ||
MediaMode | Yes | No | Enum | 0 | Possible values:
| Determines Audio media mode for SIP calls. Note that when choosing Direct Mode, the valid Video/Application Stream Mode can only be Direct/Disabled. | ||
VideoMediaMode | Yes | No | Enum | 0 | Possible values:
| Determines Video media mode for SIP calls. Note that when choosing Direct Mode, the valid Audio/Fax Stream Mode can only be Direct/Disabled. | ||
MediaTranscoding | Yes | No | Enum | 0 | Possible values:
| Controls whether or not to use Media Transcoding.
| ||
CancelOthersUponForwarding | Yes | No | Enum | 0 | Possible values:
| Controls whether forked calls should clear when one of the forked calls is forwarded. | ||
CallForked | Yes | No | Enum | 0 | Possible values:
| Controls whether to fork a call if this route is selected. | ||
ReRouteTable | No | No | int | 0 | Possible values:
| Specifies which Cause Code Reroute Table to use. None means no cause code rerouting is used. | ||
MessageTranslationTable | No | No | int | 0 | Possible values:
| Specifies which Message Translation Table to use. None means no message translation is used. | ||
SignalingGroupList | Yes | No | string | 1 | 40 - Max Length | Specifies the Signaling Groups used as the destination of calls provided as a comma-separated string of the Signaling Group IDs. Not applicable when the Destination Type is Deny or Trunk Group. | ||
Description | No | No | string | none | 64 - Max Length | Describes the Call Route Table Entry so that it is easily identifiable when re-sequencing Entries. | ||
MaximumCallDuration | No | No | int | 0 | Possible values:
| Specifies the maximum duration that a call can stay connected in minutes. A zero value will disable this timer. |
Tip | ||
---|---|---|
| ||
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource |