Page Tree | ||
---|---|---|
|
Modifies the Sonus SBC 1000/2000 system's Radius configuration settings.
Info |
---|
To use Radius Authentication, you must have at least one authentication server entry Radius Server created beforehand. To use Radius Accounting, you must have at least one accounting server entry Radius Server created beforehand. |
https://134.56.227.163/rest/radiusconfig
POST
true
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|---|---|---|---|---|---|
Authentication | Yes | No | Enum | 0 | Possible values:
| Controls the Sonus SBC 1000/2000 communication with RADIUS server for authentication . Specifies the RADIUS server description for easy referent in the general configuration section. Authentication Only* - Enables communication with RADIUS server just for User Authentication. |
Accounting | Yes | No | Enum | 0 | Possible values:
| Controls the Sonus SBC 1000/2000 communication with RADIUS server for CDR logging . Specifies the RADIUS server description for easy referent in the general configuration section. CDR Only* - Enables communication with RADIUS server just for CDR logging. |
PrimaryRADServer | No | No | int | 0 | Specifies the primary RADIUS server to use for communication. This list of servers is defined in [SPACEID:RADIUS Servers Table Page]. | |
SecondaryRADServer | No | No | int | 0 | Specifies the secondary RADIUS server IP to use for communication. This list of servers is defined in [SPACEID:RADIUS Servers Table Page]. | |
AccountingMode | Yes | No | Enum | 1 | Possible values:
| Controls the Sonus SBC 1000/2000 communication with RADIUS server for Accounting mode. Specifies the RADIUS server description for easy referent in the general configuration section. Active StandBy* - Enables communication with RADIUS server for CDR logging,By default log to Server 1. On Server 1 status DOWN logs to Server 2. Active Active* - Enables communication with RADIUS server for CDR logging, By default logs to both Server 1 and Server 2 whose status are UP. Round Robin* - Enables communication with RADIUS server for CDR logging, By default logs to both Server 1 and Server 2 on alternate basis. |
AccountingServer1 | No | No | int | 0 | Specifies the Accounting Server 1 IP to use for CDR communication. This list of servers is defined in [SPACEID:RADIUS Servers Table Page]. | |
AccountingServer2 | No | No | int | 0 | Specifies the Accounting Server 2 IP to use for CDR communication. This list of servers is defined in [SPACEID:RADIUS Servers Table Page]. |
Tip | ||
---|---|---|
| ||
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource |