Versions Compared

Old Version 4

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 5

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

About this Resource

Availability: Since
Available_since
Type Available Since
Release
1.3.0
Excerpt

The DS1 Port Group resource allows the user to configure the Sonus SBC 1000/2000 system's DS1 port types. It is only applicable on systems which include DS1 interfaces.

REST API Methods for this Resource

Resource Schema

Parameters

Configuration

Possible values:
  • 0 - rNoPorts
    • 2 - rTwoPortsPossible values:
  • 0 - IF_HW_TYPE_ETHERNET
  • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530Possible values:
  • 0 - IF_HW_TYPE_ETHERNET
  • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530Possible values:
  • 0 - rE1
    • 1 - rT1
    Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
    CardOneNumberPortsYesYesEnum0Possible values:
    • 0 - rNoPorts
    • 2 - rTwoPorts
    • 4 - rFourPorts
    • 8 - rEightPorts
    		Identifies the number of ports on interface card 1.
    Info

    This is applicable only in Sonus SBC 2000.

    CardTwoNumberPortsYesYesEnum0
  • 4 - rFourPorts
  • 8 - rEightPorts
    		• Identifies the number of ports on interface card 2, if the Sonus SBC is a two-card system.
    Info

    This is applicable only in Sonus SBC 2000.

    CardOneGroupOneTypeYesYesEnum0isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for ports 1:1-1:4, if interface card 1 is a 4-port or 8-port card. If interface card 1 is a 2-port card, then this identifies the port type for ports 1:1 and 1:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 2000.

    CardOneGroupTwoTypeYesYesEnum0Possible values:
    • 0 - IF_HW_TYPE_ETHERNET
    • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530
    		isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for ports 1:5-1:8, if interface card 1 is an 8-port card. If interface card 1 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 2000.

    CardTwoGroupOneTypeYesYesEnum0Possible values:
    • 0 - IF_HW_TYPE_ETHERNET
    • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530
    		isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for ports 2:1-2:4, if interface card 2 is a 4-port or 8-port card. If interface card 2 is a 2-port card, then this identifies the port type for ports 2:1 and 2:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 2000.

    CardTwoGroupTwoTypeYesYesEnum0Possible values:
    • 0 - IF_HW_TYPE_ETHERNET
    • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530
    		isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for ports 2:5-2:8, if interface card 2 is an 8-port card. If interface card 2 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 2000.

    CardSevenTypeYesYesEnum1Possible values:
    • 0 - IF_HW_TYPE_ETHERNET
    • 1 - IF_HW_TYPE_T1E1
    • 2 - IF_HW_TYPE_RS530
    		isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for ports 7:1 and 7:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 1000.

    CardEightTypeYesYesEnum1isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type for port 8:1, if interface card 8 is present. If the DS1 type of this port is not being modified then this attribute may be omitted from the request.
    Info

    This is applicable only in Sonus SBC 1000.

    PortTypeYesYesEnum0isdn_tip:PORT_PHYSICAL_TYPEIdentifies the port type to be applied for all the ports in the nodewhich all DS1 ports on the system should be configured. If this attribute is set then it will override all the individual card-and-group attributes, which will not need to be sent with the request. If you wish to use individual card-and-group settings, for example if you need some ports set to T1 and others to E1, then you must omit this attribute from the request.
    Info

    This is applicable in to both the Sonus SBC 1000 and Sonus SBC 2000.