Page History
About this Resource
| Excerpt |
|---|
Defines a FAX Codec Profile used by the Media List Profile Table. |
REST API Methods for this Resource
- GET faxcodecprofile
- GET faxcodecprofile id
- POST faxcodecprofile id
- PUT faxcodecprofile id
- DELETE faxcodecprofile id
Resource Schema
Configuration
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| Description | No | No | string | none | 64 - Max Length | Identifies this profile so it can be easily recognized when selecting a codec. |
| FaxRateInBitsPerSecond | No | No | int | 14400 | Possible values:
| Specifies the maximum fax connection rate. Acceptable rate values are:
|
| SignalingPacketRedundancy | No | No | int | 3 | Possible values:
| Specifies the number of redundant packets to be sent for each T.30 (signaling) message. |
| PayloadPacketRedundancy | No | No | int | 0 | Possible values:
| Specifies the number of redundant packets to be sent for each packet containing page data. |
| ErrorCorrectionMode | No | No | Enum | 0 | Possible values:
| Specifies the error correction mode (ECM) for fax calls. |
| TrainingConfirmation | No | No | Enum | 1 | Possible values:
| Specifies the Training Confirmation (TCF) procedure for fax calls.
|
| FaxRelayFallBack | No | No | Enum | 0 | Possible values:
| Specifies if the T.38 should fall back to Fax Passthrough if not supported by peer. |
| SG3ToG3Fallback | Yes | No | Enum | 0 | Possible values:
| Specifies if the system should force Super G3 to Super G3 fax calls to lower rates so T.38 protocol can be used. |
Overview
Content Tools