Use this parameter to configure NASS-IMS-Bundled-Authentication (NBA) for providing access to the IMS (IP Multimedia Subsystem) network for legacy equipment that cannot support IMS access security (IMS AKA).
Info |
---|
To support NASS IMS Auth, you must configure the accessClass as Example:
|
Info |
---|
To support NBA, you must configure a diameter Peer (pointing to the CLF node)/realmRoute and select the application ID (appId) as e2
Example:
|
...
Info |
---|
All tispan-NASS configurations should be made at the sipTrunkGroup pointing towards the UE (Access side). |
...
Code Block |
---|
% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> signaling nassImsAuth accessType <ethernet | fiber | none | xdsl> clfRealm ueDefaultLocation |
...
Code Block |
---|
% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> signaling nassImsAuth ueDefaultLocation <1-64 chars> |
Parameter | Length/Range | Description |
---|---|---|
nassImsAuth | N/A | The NASS-IMS-Bundled-Authentication (NBA) configuration object for providing access to the IMS (IP Multimedia Subsystem) network for legacy equipment that cannot support IMS access security (IMS AKA). |
accessType | N/A | The location type of the Access network this trunk group represents (default values are in square brackets []).
|
clfRealm | 1-128 characters | The DIAMETER domain of a Policy and Charging Rule Function for this NBA configuration. |
ueDefaultLocation | 1- |
255 characters | The UE default location name. |
For ueDefaultLocation:
Code Block |
---|
dmin@BIMOTA1% set addressContext default zone ACCESS sipTrunkGroup S1372_ACCESS_TG signaling nassImsAuth ueDefaultLocation Possible completions: <string, min: 1 chars, max: 64255 chars>[noc=XYZABC345;lac=EFGH;line-code=IJKL] |