Page History
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
Info | ||
---|---|---|
| ||
Related articles: |
Excerpt Include SBXDOC111:_SBC_1:1_Scenario_with_RAMP SBXDOC111:_SBC_1:1_Scenario_with_RAMP nopanel true
Use this profile to define the standard and custom codec mix profile configuration to use for a given SWe Traffic Profile. This profile includes the following default profiles:
G711_20ms
: Using 100% G711 (20 ms) calls.G711_G729_20ms
: Using 50% of G729AB (20 ms) and 50% of G711 (20ms20 ms).G7112G711
- The percentage value of this codec indicates the proportion of total number of sessions designated for pure G711 transcoding (G711-G711).T38
Info | ||
---|---|---|
| ||
With dynamic GPU resource management, the This feature does not affect the codec channel capacities in a non-GPU accelerated SWe (CPU-based SWe). |
Command Syntax
Code Block |
---|
% set system sweCodecMixProfile <profile name> <codec> <ptime value: 10ms, 20ms, 30ms, 40ms, 60ms, 80ms, 100ms> percentage <percentage value> |
Command Parameters
The following table represents the SWe Codec Mix Profile
Parameter Descriptionsparameter descriptions:
Parameter | Length/Range | Description |
---|---|---|
sweCodecMixProfile | 1-40 characters |
The SWe Codec Mix Profile is attachable to either the Note:
|
|
OPUS
| ||
<codec> | N/A | Enter the codec used by this Codec Mix Profile. Refer to Audio Codecs for the list of supported codecs. |
<ptime value> | N/A | Select a packetization time value representing 10 ms, 20 ms, 30 ms, 40 ms, 60 ms, 80ms, and 100ms:
Note: For SBC SWe Cloud 8.1, ptime values |
percentage | 0.00 -100.00 |
Note:
|
Command Example
In the following example, a custom Codec Mix profile is created ensuring the percentage distribution of the three entries equals is 100%.
Code Block |
---|
set system sweCodecMixProfile customCodecMix g723 p20 percentage 50 set system sweCodecMixProfile customCodecMix g711 p20 percentage 30 set system sweCodecMixProfile customCodecMix g729 p10 percentage 20 commit |
Best Practice
Ribbon recommends monitoring of the status status of codec channel capacities for codecs provisioned on GPU (on a per GPU device basis), as well as on CPU.
GPU Transcode Status
Shows codec channel capacities on a per GPU device basis.
Info | ||
---|---|---|
| ||
The |
Command Syntax
Code Block |
---|
show table system gpuTranscodeStatus |
Command Parameters
The following table represents the gpuTranscodeStatus descriptions:
Multiexcerpt | ||||||||
---|---|---|---|---|---|---|---|---|
| caption||||||||
|
Parameter | Status Names and Descriptions | ||||
---|---|---|---|---|---|
|
|
|
CPU Transcode Status
The cpuTranscodeStatus
captures the information on spilled-over channels due to the exhaustion of GPU resources. GPU codecs appear on the CPU when the GPU resources are exhausted and cannot accommodate GPU-supported codec channels, so the codec channels spill onto the CPU.
Command Syntax
Code Block |
---|
show table system cpuTranscodeStatus |
Command Parameters
The following table represents the cpuTranscodeStatus descriptions:
Multiexcerpt | |||||
---|---|---|---|---|---|
| |||||
Caption | | ||||
|
Parameter | Status Names and Descriptions | ||||
---|---|---|---|---|---|
|
|