Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH2UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7edf811e000e, userName='null'}
AUTH1UserResourceIdentifier{userKey=8a00a0c8613a801e016167f8a31a002b, userName='null'}
REV5UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7ea6e836000d, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85f4199b1015f7ea6e836000d, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a0c866dc3dee01670fed916200308a00a02355cd1c2f0155cd26c8a10148, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a0c866dc3dee01670fed916200308a00a02355cd1c2f0155cd26cb1f0553, userName='null'}

Use the following workflow to install an

Spacevars
0longproduct
device or devices. For a High Availability (HA) system, this includes connecting the HA cable between the two Edge 8300 devices.

Note
titleCaution

Observe the following guidelines when installing an

Spacevars
0product
system:

  • Always verify that the device power cord is disconnected from any power source prior to installation.
  • Ensure that the installation site has adequate air circulation and meets the minimum operating conditions for the system as specified in Edge 8000 Series Hardware Specifications.

Prerequisites

Gather the following items before starting the installation. Refer to Edge 8000 Shipping Contents

Panel

Table of Contents
maxLevel4

Connect Network Cables

Connect the SFP+ modules and the routing, analog, and console cables, all supplied by your system administrator or network planning team (not

for the list of items included in shipping. 

Installation items required:

  • For rack mounting the unit:
    • Phillips-head screwdriver
    • Chassis bracket and chassis bracket screws — To attach brackets to the chassis
    • Rack mount screws — To attach the chassis by its mounting brackets to the rack
  • SFP+ modules — To connect between the public (WAN) network and the SFP ports of the unit.
  • Analog telephony cables — To connect analog telephone devices to the T1/E1, FXS and FXO ports of an 8300 device.
  • Ethernet cables — To connect the private (LAN) ports to private (LAN) switches or to individual VoIP devices; to connect public (WAN) ports to external WAN devices; and to connect one HA port to another HA port between two High Availability Edge 8300 devices.
  • RS232 serial console cable — To provide administrative access to an Edge 8000 device from a laptop computer.
Info
iconfalse
titleAttention

Spacevars
0company
designs all
Spacevars
0product
models with an internal surge protection system. For more effective protection,
Spacevars
0company
recommends connecting the
Spacevars
0product
device to an external surge protector or UPS.


Workflow

StepAction
1Place or Mount the Edge 8000 Device
2Connect the Network Cables
3Connect the Power Cables and Power on the Device

Place or Mount the
Spacevars
0product
Device

For a High Availability deployment, perform this procedure for both 8300 devices.

Start

  1. Remove the device and accessories from the shipping container.
  2. Place the device on a flat, dry surface such as a desktop, shelf, or tray.

  3. For a rack mounted deployment, install the device on the rack.

    1. Attach the rack mount brackets to both sides of the Edge 8000 chassis with the chassis bracket screws supplied by

      Spacevars
      0company
      .

    2. Install the chassis in the rack with rack mount screws (not supplied by
      Spacevars
      0company
      ).

Connect the Network Cables

Connect all SFP+ modules and all cables supplied by your system administrator or network planning team. This includes, for a High Availability (HA) deployment, the HA Ethernet cable between the 8300 devices, to your device.

Start

  1. Install the SFP+ modules.
  2. Connect the routing cables per your network design:
    1. Cables to the two SFP+ ports
    2. Cables to the eight Gigabit Ethernet (GE) RJ-45 ports
  3. For the Edge 8300 device, connect the analog telephony cables:
    1. T1/E1 cables to the T1/E1 ports
    2. FXS phone lines to the Amphenol connector
    3. FXO lines to the RJ-11 ports (optionally equipped)for 8300 devices equipped with FXO ports)
  4. For a High Availability system, connect an Ethernet cable between the HA ports of the two Edge 8300 devices.
    Example: connect an Ethernet cable between port GE-6 (ge6) of the first 8300 to the same port, GE-6 (ge6), of the other 8300.
  5. Connect the console cable from your System Administrator (laptop) computer to the Console RJ-45 port, or from a terminal server to the Console RJ-45 port.

Connect the Power Cables and Power on the Device

The 

Spacevars
0longproduct
devices include single AC, redundant AC, and redundant DC models.

Connect the device to the power source and power on the system.

Note
titleCaution
  1. Always connect the power cord(s) to a power source suitable for the power required of the unit being installed. Refer to Specifications and Certifications.
  2. Secure the power cord to a cable management system using a fastener or tie wrap.


Warning
titleWarning

The equipment has a separate protective earthing terminal on the chassis that must be permanently connected to earth ground to adequately ground the chassis and protect the operator from electrical hazards.

Start

  1. Connect the AC or DC power.
    1. If the unit is equipped with AC power, connect the AC power cable or cables from the unit to the AC outlet or outlets.
    2. If the unit is equipped with DC power supplies, connect the DC power source to the power lugs on the device.
  2. Press the Power Switch on.
    1. If the unit is equipped with a single AC power supply, press the Power Switch to the On position to start the device.
    2. If the unit is equipped with redundant AC or DC power supplies, press the Power Switch for 4 - 5 seconds to start the device.
  3. Make sure the power LED on the front panel is a solid green after the device powers on.Proceed to Workflow for Initial Setup to continue.