Add_workflow_for_techpubs | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Panel | ||||||
---|---|---|---|---|---|---|
In this section:
|
Info | ||
---|---|---|
| ||
Related articles: |
After the OAM dashboard service activates, network operators must manually populate the Network Segment Table with IP address details. The Network Segment (NS) then retrieves the information from the Network Segment table (NST) through the config-agent.
The NS maintains the IP association details in a table termed Network Service Association table (NSAT), which is used during the switchover, or when the pod re-requests for an IP address using the same name.
On the SBC main screen, navigate to All > System > Network Segment Table.
Network Segment Table
Parameter | Length/Range | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | 1-23 | The Network Segment Table name for the system. | ||||||||||
Network Segment Type | N/A | The network segment type for this configuration.
| ||||||||||
Pfe ID | N/A |
| ||||||||||
VLAN ID | 2 - 4094 | The VLAN TAG assigned to this Network Segment Table. | ||||||||||
Network Interface Name | N/A | Enter the network interface:
| ||||||||||
Prefix V4 | 0 - 32 | The IPv4 prefix for this Network Segment Table. | ||||||||||
Prefix V6 | 0 - 128 | The IPv6 prefix for this Network Segment Table. | ||||||||||
State | N/A | Administrative state of the Network Segment Table. Changes are only made while disabled and will take effect when enabled. |
To create a new Network Segment Table:
Start
Use the following table when configuring the fields and then click Save.
Parameter | Length/Range | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | 1 - 23 | The Network Segment Table name for the system. | ||||||||||
Network Segment Type | N/A | The network segment type for this configuration.
| ||||||||||
Network Name | 1 - 255 | The name of the primary and secondary network. Note: This parameter is OAM specific. | ||||||||||
VLAN ID | 2 - 4094 | The VLAN TAG assigned to the Network Segment Table. | ||||||||||
Network Interface Name | N/A | Enter the network interface:
| ||||||||||
Prefix V4 | 0 - 32 | The IPv4 prefix for this Network Segment Table. | ||||||||||
Prefix V6 | 0 - 128 | The IPv6 prefix for this Network Segment Table. |
To edit the Network Segment Table:
Start
To delete the Network Segment Table:
Start