Page History
This Use this object specifies the packet outage to specify the Packet Outage detection parameters for this Gw GW Trunk Group.
To View and Edit Packet Outage
On the SBC main screen, navigate to All > Address Context > Zone > Gw GW Trunk Group > Packet Outage.
The Packet Outage can be checked for each Address Context, Zone , and Gw GW Trunk Group or for all the Address Contexts, Zones, and Gw GW Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone, and Gw GW Trunk Group.
The Packet Outage window is displayed.Figure 1: All - Address Context - Zone - Gw Trunk Group - Packet Outage
The following fields are displayed:
Table 1: Packet Outage parametersParameters
Parameter | Length/Range | Description |
|---|---|---|
Minimum Duration |
| 0-65535 | The minimum outage (in milliseconds) on a call for that call to be counted as part of the packet outage detection algorithm. The |
| default value is 6000. |
Minimum Calls |
| 0-65535 | The number of calls with outages required within the current interval to declare a packet outage event. The |
| default value is 1000. |
Bandwidth Limit Reduction |
Specifies the
| 1-100 | The amount to reduce the bandwidth limit (as a percentage of the configured limit) when a packet outage is detected. The |
| default value is 50. |
Detection State |
N/A | This flag enables automatic bandwidth reduction when a packet outage is detected. |
disabled
|
enabled
|
Detection Interval |
Specifies the
5-1440 | The size of the packet outage detection interval in minutes. The |
default value is 15. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools