Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



 

This object displays the LI Mediation Server TCP Media intercept parameters.

To View and Create/Edit TCP

To view TCP parameters, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.

On the SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media > TCP.

Info
titleNote

TCP is supported only for PCSI and IMS LI configurations. Refer Intercept Flavors and Configuration Details for configuration details.

 


TCP can be configured You can configure TCP for each Mediation Server under each Call Data Channel and default Address Context. Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server.

Caption
0Figure
1TCP Main Field

 

 


The TCP window is displayed.

Caption
0Figure
1TCP

 


The following fields are displayed:  

Caption
0Table
1TCP Parameters
Parameter

Parameter

Length/Range

Description

IP Address V4 or
V6 
V6 

N/A

IPV4/IPV6 address of the mediation server for media interception over TCP.

Port
Number 
Number 0-65535.Specifies the port number of the mediation server for media interception over TCP.
Range is 0 - 65535.
 

Dscp Value

0-63

Specifies the DSCP value for intercepted media packets sent on TCP port. Default value is 16

and range is 0 - 63

.

Mode

N/A

Specifies the mode of the TCP connection towards the mediation server for media interception.

Options are:

  • In Service
out of service
  • Out Of Service (default)

State

N/A

Specifies the state of the TCP connection towards the mediation server for media interception.

Options are:

  • Disabled (default) 
  • Enabled
KA Time60-7200Specifies the duration (
60 - 7200
In seconds) between the two keep alive transmissions in the idle condition. Default = 180 seconds.
KA Interval5-60Specifies the duration (
5 - 60
In seconds) between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. Default = 30 seconds.
KA Probe4-8Specifies the number
(4 - 8)
of re-transmissions to be carried out before declaring that the remote end is not available. Default = 4.
 


Click Save to save the configuration.

 

pagebreak