Page History
This object displays the LI Mediation Server TCP Media intercept parameters.
To View and Create/Edit TCP
To view TCP parameters, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.
On the SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media > TCP.
| Info | ||
|---|---|---|
| ||
TCP is supported only for PCSI and IMS LI configurations. Refer Refer to Intercept Flavors and Configuration Details for configuration details. |
You can configure TCP for each Mediation Server under each Call Data Channel and default Address Context. Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The TCP window is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
The following fields are displayed:
Parameter | Length/Range | Description |
|---|---|---|
| IP Address V4 or V6 | N/A | IPV4/IPV6 address of the mediation server for media interception over TCP. |
| Port Number | 0-65535 |
| Specifies the port number of the mediation server for media interception over TCP. | ||
Dscp Value | 0-63 | Specifies the DSCP value for intercepted media packets sent on TCP port. Default |
= 16. | ||
Mode | N/A | Specifies the mode of the TCP connection towards the mediation server for media interception.
|
State | N/A | Specifies the state of the TCP connection towards the mediation server for media interception.
|
| KA Time | 60-7200 | Specifies the duration (In seconds) between the two keep alive transmissions in the idle condition. Default = 180 seconds. |
| KA Interval | 5-60 | Specifies the duration (In seconds) between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. Default = 30 seconds. |
| KA Probe | 4-8 | Specifies the number of re-transmissions to be carried out before declaring that the remote end is not available. Default = 4. |
Click Save to save the configuration.
Overview
Content Tools