Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Table of Contents
maxLevel2



Info
iconfalse

Related articles:

Children Display



Specifies
Excerpt

The Signaling Qos QoS KPI Profile is associated with an IP Signaling Profile which that you in turn can be associated associate to an IP Peer or , IP Signaling Peer Group or trunk group Trunk Group as a part of an IP Signaling Profile.

To View

Ip

IP Signaling Peer Group

On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Ip IP Signaling Peer Group. The Ip IP Signaling Peer Group window is displayed.

Figure 1: Call Routing - Profiles - Ip Signaling Peer Group

Image Removed


To Edit

Ip

IP Signaling Peer Group

To edit any of the Ip IP Signaling Peer Group in the list, click the radio button next to the specific Ip specific IP Signaling Peer Group name.

The Edit Selected Ip Selected IP Signaling Peer Group window is displayed below.

Figure 2: Call Routing - Profiles - Ip Signaling Peer Group Edit

Image Removed

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create

Ip

IP Signaling Peer Group

To create a new Ip IP Signaling Peer Group, click New Ip IP Signaling Peer Group tab on the Ip the IP Signaling Peer Group List panel.

Figure 3: Call Routing - Profiles - Ip Signaling Peer Group Fields

Image Removed

The Create New Ip New IP Signaling Peer Group window is displayed.

Figure 4: Call Routing - Profiles - Ip IP Signaling Peer Group Create Window

Image Removed

The following fields are displayed:



Table 1: IP Signaling Peer Group Parameters:

Parameter

Description

Name

Specifies the

The name of the IP Signaling Peer Group.

Length: Up to 23 characters

Description

Specifies a

A short description of

the

this IP Signaling Peer Group

used

.

Length: Up to 99 characters

Send All

Ip

IP Address And FQDN

Specifies

Choose whether or not to send all the IP Addresses and the FQDNs using this IP Signaling Peer Group

or not

.

The options are:

  • disable
  • enable
  • Disable (default)
  • Enable
IP Signaling Peer Group Data

Sequence

Specifies the sequence of this IP Signaling Peer Group.

Service Status

Specifies the type of service for this IP Signaling Peer Group. Select

inService

In Service to use this IP peer.

The options are:

  • inService
  • outOfService
  • In Service
  • Out Of Service (default)

IP Address

Specify

Ip Address

the IP Address of this IP Signaling Peer Group.

Ip

IP Port

Specifies

Specify the TCP/UDP port value of this IP Signaling Peer Group.

Fqdn

FQDN

Specifies

Specify the FQDN value to use for sending egress calls/requests to the IP peer.

Fqdn

FQDN Port

Specifies

Specify the FQDN port number to be used for sending egress calls/requests to the  IP peer.

To Delete

Ip

IP Signaling Peer Group

To delete any of the created Ip an IP Signaling Peer Group, click the radio "x" button next to the specific IP specific IP Signaling Peer Group which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific Ip IP Signaling Peer Group from the list.