Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Table of Contents
maxLevel2



Excerpt

Telephone Number Mapping (ENUM) transforms the telephone number into a universal identifier that can be used across different devices and applications (voice, fax, mobile, e-mail, text messaging, location-based services and the Internet). ENUM can also be used to implement variety of services like number portability, call forwarding etc. It uses a DNS NAPTR record to translate a telephone number into a Uniform Resource Identifier or IP address that can be used in Internet communications.

Since a call may span across multiple network elements and to indicate in signaling to the next network element, that an ENUM query has already been made for the 'TEL URI', the "Process Enumdi" parameter is used.

The SBC can process the enumdi indicator received in ingress INVITE and avoid another redundant query and similarly, if it has done a ENUM dip in conjunction with ERE/PSX, it can send this parameter in egress INVITE thus preventing redundant queries further down the network. When a call spans multiple network elements, use the "Process Enumdi" flag to to notify the next network element that an ENUM query was performed for the 'TEL URI'.


Info
iconfalse
titleNOTE
  • If the R-URI transparency is enabled, then the SBC will not send the enumdi indicator in egress signaling even if an ENUM dip
has been done
  • is performed by the ERE/PSX.

  • The Feature Control Profile associated with this
Sip
  • SIP Trunk Group can be replaced with a different Feature Control Profile, if desired. However, deleting a Feature Control Profile from a
Sip
  • SIP Trunk Group object can cause call failures.


Include Page

SBXDOC121:

_Transparency_Profile_Note

SBXDOC121:

_Transparency_Profile_Note

To View Feature Control Profile

On the SBC main screen,

navigate to Configuration > System Provisioning > Category: Call Routing > Profiles > Feature Control Profile. The Feature Control Profile window is displayed.

choose a path:

  • All > Profiles > Feature Control Profile
  • Configuration > Profile Management > Category: Feature Control Profile > Feature Control Profile
  • Configuration > System Provisioning > Category: Call Routing > Profiles > Control Profile

The Feature Control Profile window is displayed.

Figure 1: Call Routing - Profiles - Feature Control Profile

Image Modified


To Edit Feature Control Profile

To edit any of the Feature Control Profile in the list, click the radio button next to the

specific Feature

specific Feature Control Profile name.

Figure 2: Call Routing - Feature Control Profile Highlighted

Image Removed
The

The Edit Selected Feature Control Profile

window

 window is displayed.

Figure 3: Call Routing - Feature Control Profile Edit Window

Image Modified


Make the required changes and

click Save at the right hand bottom of the panel to save the changes made

click Save.

To Create Feature Control Profile

To create a new Feature Control Profile,

click

click New Feature Control Profile tab on

the Feature The

the Feature Control Profile List panel.

Figure 4: Call Routing - Feature Control Profile Fields

Image Removed

The Create New Feature Control Profile window is displayed.

Figure 5: Call Routing - Feature Control Profile Create Window

Image Modified


The following fields are displayed:

Table 1:



Feature Control Profile Parameters:

Parameter

Description

Name

Specifies the

The unique name of the Feature Control Profile.

Length: Up to 23 characters

Process Destination Tgrp

Specifies whether to enable the Process Destination Tgrp option or not.

The options are:

Enable this flag to process the destination Trunk Group.

  • Disable 
Disable
  • (default)
  • Enable
 

Process Destination Trunk Context

Specifies whether to enable the Process Destination Disable

Enable this flag to use the destination Trunk Context option or not.

The options are:

  • Disable (default)
  • Enable
Process Enumdi

Specifies whether the Enum Dip Indicator should be processed or not.

The options are:

When a call spans multiple network elements, use the "Process Enumdi" flag to notify the next network element that an ENUM query (ENUM Dip) was performed for the 'TEL URI'.

  • Disable 
Disable
  • (default)
  • Enable
Do Not Validate GAP

Enable this flag to allow the SBC ERE to skip Generic Address Parameter (GAP) validation.

Disable
  • Disable (default)
  • Enable


To Copy Feature Control Profile

To copy any of the created Feature Control Profile and to make any minor changes, click the radio button next to the

specific Feature

specific Feature Control Profile to highlight the row.

Figure 6: Call Routing - Feature Control Profile Highlighted

Image Removed
Click

Click Copy Feature Control

Profile

Profile tab on the Feature Control Profile List panel.

Figure 7: Call Routing - Feature Control Profile Fields

Image Removed

The Copy Selected Feature Control Profile window is displayed along with the

field details which can be edited.

Figure 8: Call Routing - Feature Control Profile Copy Window

Image Removed

The following parameters are displayed:

Table 2: Feature Control Profile Parameters

Parameter

Description

Name

Specifies the unique name of the Feature Control Profile.

Process Destination Tgrp

Specifies whether to enable the Process Destination Tgrp option or not.

The options are:

  • Disable (default)
  • Enable

 

Process Destination Trunk Context

Specifies whether to enable the Process Destination Trunk Context option or not.

The options are:

  • Disable (default)
  • Enable
Process Enumdi

Specifies whether the Enum Dip Indicator should be processed or not.

The options are:

  • Disable (default)
  • Enable
Do Not Validate GAP

Enable this flag to allow the SBC ERE to skip Generic Address Parameter (GAP) validation.

  • Disable (default)
  • Enable
Ip Protocal FlagsUse IP Protocol

Specifies whether to use the Ip Protocol or not for the created Feature Control Profiles. The options are:

  • Disable (default)
  • Enable
Default Called User

If enabled, the application User Name is used the Default Called User value. The options are:

  • Disable (default)
  • Enable

NOTE: This parameter is visible only if Use IP Protocol parameter is enabled.

Honor Phone Context Parameter

When this flag is enabled, PSX globalizes the incoming called number using the phone-context value received in Called-URI. Once the number is globalized using phone-context, the PSX acts as if it received a global number in policy request and use the modified number for further call processing.

  • Disable (default)
  • Enable
NOTE:  This parameter is visible only if Use IP Protocol parameter is enabled

editable fields.


Info
iconfalse
titleNOTE

The IP Protocol flags can be enabled or disabled for each Feature Control Profile created.


Make the required changes to the required fields and

click

click Save

to

 to save the changes. The copied Feature Control Profile is displayed at the bottom of the original Feature Control Profile in the Feature Control Profile List panel.

To Delete Feature Control Profile

To delete any of the created Feature Control Profile,

  1. click the radio button next to the
specific Feature
  1. specific Feature Control Profile which you want to delete.

Figure 9: Call Routing - Feature Control Profile Highlighted

Image Removed
Click
  1. Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Figure 10: Call Routing - Feature Control Profile Delete Confirmation

Image Removed
Click Yes
  1. Click Yes to remove the specific Feature Control Profile from the list.