Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
Use this parameter to specify how to treat call forwarding history information.
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Sip Headers And Parameters > Call Forwarding > History Information. The History Information window is displayed.
On the History Information window, choose the Ip Signaling Profile as DEFAULT_H323SIP to view the History Information for H323 Trunk Group.
Figure 1: Trunk Provisioning - Egress Ip Attributes H323 History Information
There are no History Information parameters for DEFAULT_H323 type of Egress Ip Attributes.
On the History Information window, choose the Ip Signaling Profile as DEFAULT_SIP to view the History Information for the History Information for the SIP Trunk Group.
Figure 2: Trunk Trunk Provisioning - Egress Ip Attributes SIP History Information
The following fields are displayed:
Table 1: Egress Ip Attributes Call Forwarding
Parameter | Description |
---|---|
Include History information | Enable this flag to include History-Info in INVITE egress message.
|
Cause Parameters In RFC4458 | Enable this flag to include the History-Info cause value in egress message as per RFC 4458 recommendation. When the flag is enabled, the output is similar to the following example:
|
Reason With Cause Value As Per RFC4244 | Enable this flag to include History-Info cause value with Reason Header as per RFC 4244 recommendation. When the flag is enabled, the output is similar to the following example:
disable enable |
Support RFC7044 | Enable this flag to set the History-Info header's behavior in accordance with RFC-7044. disable
enable
|
Apply History Info Privacy | Enable this flag to anonymize the History-Info header. disable
enable
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.