Excerpt |
---|
This section specifies the Redirect parameters for Egress |
...
IP Attributes. To View and Edit RedirectOn the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > |
...
IP Signaling Profile > Egress Ip Attributes > Redirect. The Redirect window is displayed. |
...
...
...
Image Removed
There are no Redirect parameters for DEFAULT_H323 type of Egress Ip Attributes.
...
SIPOn the Redirect window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Redirect for SIP Trunk Group. Image Modified
Parameter Descriptions: Parameter | Description |
---|
Mode | Use this object to control SIP redirection: - Accept Redirection – (default) Multiple redirection are allowed.
- Allow Single Redirect Attempt – Only a single Redirect is allowed per route. Additional Redirects cause crankback to be performed.
- Reject Redirection – If a Redirect is received, crank back is performed.
- Stop Hunt – Prevent call attempts on subsequent trunk groups if 3xx is received following an Invite and the SBC fails to establish the call with all the contacts from 3xx.
| Contact Handling | Select one of the following to control processing of contacts received in SIP Redirects: - Merge Received Contacts – Contacts received in Redirects are ordered by q-value and inserted at the head of the list of untried contacts.
- Purge Existing Contacts – Contacts received in Redirects are ordered by q-value and replace untried contacts.
|
Make the required changes and click Save |
...