Page History
| Panel | ||||
|---|---|---|---|---|
In this section:
|
Use this object to configure the Backward Call Indicator (BCI) for Egress IP attributes.
To View and Edit
...
BCI
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip IP Signaling Profile > Egress Ip Attributes > Bci BCI. The Bci BCI window is displayed.
DEFAULT_H323
On the Bci BCI window, choose the Ip IP Signaling Profile as DEFAULT_H323 to view the Bci BCI fields for H323 the H.323 Trunk Group.
Figure 1: Trunk Trunk Provisioning - Egress Ip Attributes H323 BciBCI
The following fields are displayed:
Table 1: Egress Egress Ip Attributes H323 Bci BCI Parameters
Parameter | Description |
|---|---|
| Bci BCI Interwork Encountered | Enable this flag to indicate that ISUP is interworking with a network which is not capable of providing that cannot provide as many services as ISUP does. ISUP networks will, therefore, not employ certain features they otherwise normally would, including potentially the use of ISDN cause codes in failure conditions. The options are:
|
BCI ISDN AddressBci Isdn Addess | Enable this flag to enable ISDN Address in the BCI parameter of backward SS7 messages (e.g. ACM or ANM). The options are:
|
DEFAULT_SIP
On the Bci BCI window, choose the Ip Signaling IP Signaling Profile as DEFAULT_SIP to view the Bci BCI fields for a SIP Trunk Group.
Figure 2: Trunk Trunk Provisioning - Egress Ip Attributes IP Attributes SIP BciBCI
The following fields are displayed:
Table 2: Egress Ip Egress IP Attributes SIP Bci BCI Parameters
Parameter | Description |
|---|---|
| Bci BCI Interwork Encountered | Enable this flag to indicate that ISUP is interworking with a network which is not capable of providing that cannot provide as many services as ISUP does. ISUP networks will, therefore, not employ certain features they otherwise normally would, including potentially the use of ISDN cause codes in failure conditions. The options are:
|
BCI ISDN AddressBci Isdn Addess | Enable this flag to enable ISDN Address in the BCI parameter of backward SS7 messages (e.g. ACM or ANM). The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools