...
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Packet Outage. The Packet Outage window is displayed.
...
The Edit Packet Outage window is displayed.
Figure 1: H323 H323 Trunk Advanced - Packet Outage Edit Window
The following fields are displayed:
Table 1: H323 Trunk Advanced - Packet Outage ParametersParameter Descriptions:
Parameter | Description |
---|---|
Minimum Duration | Specifies the outage period for a call, in milliseconds, for that call to be counted as part of the packet outage detection algorithm. Must be 0-65535; default is 6000 (milliseconds). |
Minimum Calls | Specifies, for the current interval, the number of calls with outages that are required to declare a packet outage event. Must be 0-65535, default is 1000 (calls). |
Bandwidth Limit Reduction | Specifies the amount to reduce the bandwidth limit (as a percentage of the configured limit) when a packet outage is detected. Must be 0-100; the default is 50 (percent). |
Detection State | Specifies the administrative state of packet outage detection:
|
Detection Interval | Specifies the time interval, in minutes, for detecting packet outages via the packet outage detection algorithm. Must be 5- 1440; default is 15 (minutes). |
...