Page History
...
To View and Edit the Media Port Range
On the SBC main screen, go to choose a path:
- All > Address Context > Zone > SIP Trunk Group > Media > Media Port
...
- Range
- Configuration > System Provisioning > Category: SIP Carrier Peering > SIP Trunk Group > Media > Media Port Range
...
- Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > SIP Trunk Advanced > SIP Trunk - Media - Advanced > Media > Media Port Range
The Media Port Range window opens. Use the drop-down lists to select the specific Address Context, Zone and SIP Trunk Group you want to configure. The currently configured values for the specified trunk group appear.
Figure 1: SIP Trunk Group - Media Port Range
...
Use the following table to change the values as needed and then click Save.
Table 1: SIP Trunk Group - Media Port Range Parameters
| Parameter | Description |
|---|---|
| Base UDP Port | Specifies the start of the range of UDP |
ports for this trunk group to use for RTP/RTCP media |
. This |
value must be within the system-level media port range. Values between 1024-65534 are allowed, and the default value is none. If the value is set to none, the value is inherited from the system-level Media Port Range. | |
| Max UDP Port | Specifies the end of the range of UDP ports to use for RTP/RTCP media for this trunk group. This value must be greater than the value of Base UDP Port |
Overview
Content Tools