Panel | ||||
---|---|---|---|---|
In this section:
|
Info | ||
---|---|---|
| ||
Related articles:
|
The
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
The IP Signaling Profile flag, "Diversion History Info Interworking
", indicates to the egress side that the inter-working is accomplished as per the RFC 6044. In addition, the existing Redirecting Info flag of "Diversion" and "History-Info" will indicate to the egress the target inter-working header which needs to be sent out in INVITE message. The Diversion and History-Info headers received on the ingress side are transparently passed across to the egress where newly introduced flags determine the corresponding header to be used to pass on this information in outgoing INVITE.
This feature is supported across GW-GW, where the
is the egress node. Spacevars 0 product
Note |
---|
When a 3xx response is received with both Diversion and History-Info header, Diversion header processing is given priority within the received 3xx, irrespective of the Diversion or History-Info configuration on the new egress route where the call is redirected. |
Include Page | ||||
---|---|---|---|---|
|
On the
Spacevars | ||
---|---|---|
|
On the Call Forwarding window, choose the Ip IP Signaling Profile as DEFAULT_SIP to view the Call Forwarding for SIP Trunk Group.
Figure 2: Trunk Trunk Provisioning - Egress Ip IP Attributes SIP Call Forwarding
The following fields are displayed:
Table 1: Egress Ip Egress IP Attributes Call Forwarding
Parameter | Description | ||||
---|---|---|---|---|---|
Diversion History Info Interworking | Enable flag to allow interworking between Diversion and History-Info header as per RFC 6044. The
NOTE: Diversion History Info Interworking is Interworking is only visible when either Diversion or History-Info header is selected as the egress call forwarding header. Diversion and History-Info Transparency configuration controls are ignored when it is enabled. This parameter has precedence over the others. | ||||
Data Mapping | Use this parameter to define how to map the diversion or redirecting data. Options are:
| ||||
Diversion Header Transparency | When enabled, the ingress Diversion header is passed through unchanged. Call forwarding data mapping transparency applies to Diversion header only.
|
Make the required changes and click Save.