Page History
...
This section specifies the Privacy parameters for Egress Ip IP Attributes.
To View and Edit Privacy - Flags
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip IP Signaling Profile > Egress Ip IP Attributes > Privacy > Flags. The Flags window is displayed.
...
On the Flags window, choose the Ip IP Signaling Profile as DEFAULT_H323 to view the Privacythe Privacy-Flags parameters for the H323 Trunk Group.
Figure 1: Trunk Trunk Provisioning - Egress Ip IP Attributes H323 Privacy-Flags
...
There are no Privacy-Flags parameters for DEFAULT_H323 type of Egress Ip IP Attributes.
DEFAULT_SIP
On the Flags window, choose the Ip IP Signaling Profile as DEFAULT_SIP to view the Privacy-Flags for SIP Trunk Group.
Figure 2: Trunk Trunk Provisioning - Egress Ip IP Attributes SIP Privacy-Flags
The following fields are displayed:
Table 1: Egress Ip IP Attributes SIP Privacy Parameters
Parameter | Description |
|---|---|
| Include Privacy | Specifies whether to enable the Privacy flag for Egress IP Attributes or not. The options are:
|
| Privacy Required By Proxy | Specifies whether to enable the Privacy Required by Proxy flag for Egress IP Attributes or not. The options are:
|
| Ms Ms Lync Privacy Support | Specified whether to enable the Microsoft Lync Privacy Support flag for Egress IP Attributes or not. The options are:
|
| Include Embedded PAIHeader In Redirected Invite Invite | Specifies Specifies whether to include the embedded PAI headers in the redirected invites or not. The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools