Page History

...

Note
When configuring the Domain Controller, we recommend using a domain name other than the Domain Admin user.

Step 1 - Configure the Domain Controllers

This step allows you to specify the Domain Controller(s) which will be used in the

Spacevars
0 product

system. The information from the same domain controller(s) will be used for AD-based telephony routing and for Logging in to SBC Edge using an AD domain user.

...

• DC Enabled: Set this field to True.
• Description: The name you wish to use for referencing this domain controller - used in the next step.
• IP Address/FQDN: The IP address or FQDN of the Domain Controller.
• DC Type: Set this field to Authentication.
• Search Scope: For example, dc=uxdemo,dc=net.
• Server Timeout: The default is 5 (seconds), which is usually only updated if you receive TAC input.
• User Name: For example, uxacc@uxdemo.net.
• Enter and Confirm Password: The password for the AD user.
• DC Priority: Select the priority ranking of the domain controller.
  
  

Create Domain Controller

Anchor
step2 step2

Step 2 - Configure

Spacevars
0 product

 for Active Directory Access

In this step, we configure the Active Directory settings on

Spacevars
0 product

such that we can authenticate users through the Domain Controller created earlier. Configuring the SBC Edge Portfolio for Active Directory with the following settings:

...

• Select the Domain Controller - created in Step 1

Step 3 - Configure AD User Group to Access Level Mapping

In this step, we map the Active Directory (AD) group with the SBC Edge access level for the AD user we wish to grant access on the

Spacevars
0 product

:

...

Create User Group Mapping

Step 4 - Login with an Active Directory Domain User

To verify the AD domain user can access the

Spacevars
0 product

, the AD username must be supplied in the format USERNAME@DOMAIN - see How User Authentication Works. Enter the following in the login screen

...