Page History

Panel

In this section:

Table of Contents

maxLevel	2

Specifies the details about the Options policer.

To View and Edit Options

On SBC main screen, go to Configuration > System Provisioning > Security Configuration >Sip Cac Profile > Options.

Select the desired Sip Cac Profile from the drop-down list to view its respective Options parameters.

The Options window is displayed.

Figure 1: Security Configuration - Sip Cac Profile - Options

The following fields are displayed:

Table 1: Options Parameters

Parameter	Description
`Ingress Aggregate Preference`	Specifies the preference for OPTIONS within the ingress aggregate policer. The value range from 1 - 10. The default value is 1.
`Ingress Burst` `Size`	Specifies the maximum burst size for ingress OPTIONS. The value range from 1 - 10000. The default value is 1.
`Ingress Rate`	Specifies the maximum ingress OPTIONS rate in OPTIONS per period. The value range from 1 - 1000 or `unlimited`.
`Ingress Rate` `Period`	Specifies the time period (in seconds) over which ingress OPTIONS rate applies. The value range from 1 - 10 seconds. The default value is 1 second.
`Egress Aggregate Preference`	Specifies the preference for OPTIONS within the egress aggregate policer. The value range from 1 - 10. The default value is 1.
`Egress Burst` `Size`	Specifies the maximum burst size for egress OPTIONS. The value range from 1 - 1000. The default value is 1.
`Egress Rate`	Specifies the maximum egress OPTIONS rate in aggregate messages per period. The value range from 1 - 1000 or `unlimited`.
`Egress Rate` `Period`	Specifies the time period (in seconds) over which egress OPTIONS rate applies. The value range from 1 - 10 seconds. The default value is 1 second.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.