Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Table of Contents
maxLevel3

Include Page
_Transparency_Profile_Note
_Transparency_Profile_Note

Use this object to configure the SIP Headers and Parameters flags.

To View and Edit Sip Headers And Parameters - Flags

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Sip Headers And Parameters > Flags. The Flags window is displayed.

DEFAULT_H323

On the Flags window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Flags for H323 Trunk Group.

Figure 1: Trunk Provisioning - Egress Ip Attributes H323 Sip Headers and parameters - Flags

There are no Flags parameters for DEFAULT_H323 type of Egress Ip Attributes.

DEFAULT_SIP

On the Flags window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Flags for SIP Trunk Group.

Figure 2: Trunk Provisioning - Egress Ip Attributes SIP Sip Headers And Parameters - Flags

The following fields are displayed:

Table 1: Egress Ip Attributes Sip Headers and Parameters - Flags

Parameter

Description

Include Cic

If enabled, the

Spacevars
0product
includes the Carrier Identification Code in a cic= parameter in outgoing INVITE messages. The options are:

  • disable (default)
  • enable
Include Cpc Information

If enabled, the 

Spacevars
0product
includes the Calling Party Category (CPC) parameter value in the From header of outgoing SIP INVITE messages.The CPC parameter characterizes the station used to originate a call, such as ordinary, priority, data, test, operator, pay phone, prison, hotel or unknown. The options are:

  • disable (default)
  • enable
Include Npi

If enabled, the

Spacevars
0product
includes the Numbering Plan Indicator in a npi= parameter in outgoing INVITE messages. The options are:

  • disable (default)
  • enable
Include Olip

If enabled, the

Spacevars
0product
includes the Originating Line Information Parameter in a oli= parameter in outgoing INVITE messages. The options are:

  • disable (default)
  • enable
Include PKAdn

When enabled, the 

Spacevars
0product
includes the P-K-Adn header in egress SIP messages. When disabled, the SBCdoes not include the P-K-Adn header. The P-K-Adn header is a customer-specific SIP header used for ISUP-to-SIP interworking and contains the Translation Source Number (TSN) used in Number to SIP URL translation via the Number Username Translation screen (Generic variant only). The options are:

  • disable (default)
  • enable
Include Pstn Parameters

If enabled, the 

Spacevars
0product
  includes a set of specific PSTN parameters in a pstn-params= entry in outgoing INVITE messages. The PSTN parameters currently included in pstn-params are Screening Indicator, ISDN Indicator, and Transmission Medium Requirement (TMR). The options are:

  • disable (default)
  • enable
Include Qvalue

If enabled, the ERE SIP proxy/redirector includes the qvalue parameter (for example, q=0.9) in the Contact header of outgoing 3xx messages. The options are:

  • disable (default)
  • enable
Skip CSeq Check In Early Dialog

When enabled, the 

Spacevars
0product
accepts multiple SIP requests in which the CSeq number in a later request is of a lesser value than the CSeq number received in earlier requests. The options are:

  • disable (default)
  • enable
Transparency For  Destination Trunk Group Parameter

When enabled, if ERE receives both tgrp parameter and trunk-context in an ingress INVITE Request-URI, ERE as proxy transparently passes the tgrp parameter and trunk-context in the egress INVITE Request-URI. Values selected for the "Destination Trunk Group Option" are ignored. The options are:

  • disable (default)
  • enable
End To End Ack

When enabled, the ACK is sent towards Egress for the initial invite after receiving it from the Ingress (remote) entity. The options are:

  • disable (default)
  • enable


Make the required changes and click Save at the right hand bottom of the panel to save the changes made.