Page History
...
- SBC Core can connect to the network as mentioned in Network and Connectivity.
- Microsoft SBA prefers transport as TLS. Establishing a TLS connection between SBC SWe Core and Microsoft SBA is covered under Configure SBC for TLS.
- SBC Core configuration for MS Teams Direct Routing and PSTN are covered under Configure SBC for MS Teams.
- SBC Core configuration's PSP, IPSP, SIP Trunk Group, IP Peer, Routing Label, and Call Routing are covered under Configure ERE for MS Teams.
- SBC Core generic configurations such as: crypto suite profile, codec entry and SMM are covered in SBC Core SBA Leg Generic Configuration.
- SBC Core specific configuration in relation to the Microsoft SBA Leg is covered under Microsoft SBA Leg Configuration.
...
SBC Core should be configured for Teams Direct Routing and PSTN with the below link:
https://doc.rbbn.com/display/ALLDOC/Configure+SBC+for+MS+Teams
| Info |
|---|
Follow the section from Common SBC Configuration till Configure SBC for MS Teams Media Bypass. |
Anchor Configure ERE for MS Teams Configure ERE for MS Teams
Configure ERE for MS Teams
| Configure ERE for MS Teams | |
| Configure ERE for MS Teams |
SBC Core has an Embedded Routing Engine (ERE). It can be configured as mentioned in the link below:
https://doc.rbbn.com/display/ALLDOC/Configure+ERE+for+MS+Teams
| Note |
|---|
Once the above 2 sections are configured, proceed with the below mentioned sections. |
...
| Note |
|---|
Attach the TLS Profile created earlier in Configure SBC for TLS. |
| Warning |
|---|
There are a few areas that result in a TLS negotiation issue. One area involves assigning the incorrect port. Ensure the following are accomplished:
|
...
Create a SIP Trunk Group towards the SBA and assign corresponding profiles such as PSP and IPSP, that were created in earlier steps.
...
For Prerequisites on Direct routing SBA, refer to the following link:
Anchor Installation Installation
Installation
| Installation | |
| Installation |
For Installation on Direct routing SBA refer to Step 1 in the following link:
Anchor Configuration Configuration
Configuration
| Configuration | |
| Configuration |
For Configuring on Direct routing SBA refer to Step 2 in the following link:
| Info |
|---|
|
...
| Warning |
|---|
As SWe Core would be interacting with Virtual Survivable Branch Appliance (vSBA) in the current deployment scenario, configuring Step 3: Configure SBC SWe Edge |
...
| Tip |
|---|
Before you begin: You must obtain a Trusted Root CA Certificate before you can proceed - your options are:
|
...
Overview
Content Tools