Page History

...

1. On the VMware platform only, before beginning the upgrade, disable the CPU reservation check inside the guest by renaming the file: vmware-toolbox-cmd  For example, issue the following command: 
   mv /usr/bin/vmware-toolbox-cmd /usr/bin/vmware-toolbox-cmd.bak
2. For either platform, before starting the upgrade procedure, shutdown the standby VM instance and double the number of vCPUs specified for the VM. Refer to the procedure you used creating a VM that is appropriate for your specific deployment: 
    (VMware) Creating a New SBC SWe VM Instance with VMXNET3 (step 7) 
   (VMware) Creating a New SBC SWe VM Instance with Direct IO Passthru (step 7) 
   (KVM) Creating a New SBC SWe Instance on KVM Hypervisor (step 6) 
   (KVM) Creating a New SBC SWe Instance with PCI Pass-Through Device (step 6)
3. After increasing the number of vCPUs, power on the standby instance with the increased number of vCPUs in the same release.
4. Switch over the active instance, so that the standby becomes the new active instance. Don't wait for the standby instance to come up. It may not come up due to the resource mismatch.
5. Shutdown the new standby instance and double its number of vCPUs, as done earlier in step 2.
6. Bring up (power on) the new standby and wait for the active and standby nodes to sync.

...