Page History

...

1. Download the 

   Spacevars
   0 product

    artifacts ‘cluster-install-ev.sh’ and ‘ev-fullpkg.tar.xz’ to the /opt directory of the primary node (note that you will need an HA license to utilize this functionality).

   Info
   title Note
   For these artifacts, log in to Salesforce and open an additional browser for the Ribbon Global Software Center (GSC). In the Downloads section, search for the name and version of the required software. Reach out to   Ribbon Support for more information.

   
   

2. Enable read-write-execute permissions for the copied files using the command given below:

   Code Block
   chmod +x cluster-install-ev.sh

3. To execute the installation process, use the following command:

   Code Block
   ./cluster-install-ev.sh

   The installation procedure will begin. Please provide input as prompted by the console output during the installation process.

   The installation creates a log file of all the performed actions for historical review/troubleshooting. The name of this file is $MM-DD-YYYY-ev-install.log.

4. You are prompted to enter information related to your networking configuration. Please read this section carefully and provide appropriate values for your network environment.

   Once the installation is complete, the console screen displays the following message:

   “

   Spacevars
   0 product

   Installation/Upgrade Completed” 

   A directory named scc-build is created.

5. All the services start and all replica-expected-values reach their target (for example 1/1 or 5/5) over the next several minutes. To validate, run the following command:

   Code Block
   docker service ls

   

   Tip
   title Tip
   Make sure that the replicas are all meeting their targets – for example, 1/1 or 5/5. If they are not, run the following command and check the Health section of the output using the following command:  Code Block docker service ps $service_name -no-trunc

   
   

6. For the initial SCC configuration, register your 

   Spacevars
   0 product

   server by accessing it through the web interface at its IP address and entering the registration information that you received in your email. If you didn’t receive the registration information, reach out to Ribbon Support.
   
7. Enter the 

   Spacevars
   0 product

   admin registration details and click NEXT.
   
8. Enter the Tenant admin registration details and click NEXT.
   
9. Click APPLY to complete the registration.
   
10. Click LOGIN to navigate to the login screen.
    
11. Enter the credentials and click SIGN IN to log in to the 

    Spacevars
    0 product

    .
    

...

1. Download the 

   Spacevars
   0 product

   artifacts cluster- install-ev.sh and ev-fullpkg.tar.xz to the /opt directory of your system.

   Info
   title Note
   For these artifacts, log in to Salesforce and open an additional browser for the Ribbon Global Software Center (GSC). In the Downloads section, search for the name and version of the required software. Reach out to   Ribbon Support for more information.

   
   

2. Enable read-write-execute permissions for the copied files using the commands given below:
   

   Code Block
   chmod +x cluster-install-ev.sh

   
   

3. Execute the following command to start the installation process:

   Code Block
   ./cluster-install-ev.sh

   
   

4. The installation creates a log file of all actions for historical review/ troubleshooting using the  file format:  $MM-DD-YYYY-ev-install.log . When prompted, enter validation or update information related to your networking configuration environment. Once the installation completes, the console screen displays the message “

   Spacevars
   0 product

   Installation/Upgrade Completed”. 

5. To check whether the containers started  successfully,  use the following command:
   

   Code Block
   docker service ls

   All the services start and all replica-expected-values reach their target (for example 1/1 or 5/5) over the next several minutes.
   Example:
   
   

...

1. Download the 

   Spacevars
   0 product

    artifacts ‘cluster-install-ev.sh’ and ‘ev-fullpkg.tar.xz’ to the /opt directory of the primary node (note that you will need an HA license to utilize this functionality).

   Info
   title Note
   For these artifacts, log in to Salesforce and open an additional browser for the Ribbon Global Software Center (GSC). In the Downloads section, search for the name and version of the required software. Reach out to   Ribbon Support for more information.

   
   

2. Enable read-write-execute permissions for the copied files using the command given below:

   Code Block
   chmod +x cluster-install-ev.sh

3. To execute the installation process, use the following command:

   Code Block
   ./cluster-install-ev.sh

   The installation procedure will begin. Please provide input as prompted by the console output during the installation process.

   The installation creates a log file of all the performed actions for historical review/troubleshooting. The name of this file is $MM-DD-YYYY-ev-install.log.

4. You are prompted to enter information related to your networking configuration. Please read this section carefully and provide appropriate values for your network environment.

   Once the installation is complete, the console screen displays the following message:

   “

   Spacevars
   0 product

   Installation/Upgrade Completed” 

   A directory named scc-build is created.

5. All the services start and all replica-expected-values reach their target (for example 1/1 or 5/5) over the next several minutes. To validate, run the following command:

   Code Block
   docker service ls

   

   Tip
   title Tip
   Make sure that the replicas are all meeting their targets – for example, 1/1 or 5/5. If they are not, run the following command and check the Health section of the output using the following command:  Code Block docker service ps $service_name -no-trunc

   
   

6. For the initial SCC configuration, register your 

   Spacevars
   0 product

   server by accessing it through the web interface at its IP address and entering the registration information that you received in your email. If you didn’t receive the registration information, reach out to Ribbon Support.
   
7. Enter the 

   Spacevars
   0 product

   admin registration details and click NEXT.
   
8. Enter the Tenant admin registration details and click NEXT.
   
9. Click APPLY to complete the registration.
   
10. Click LOGIN to navigate to the login screen.
    
11. Enter the credentials and click SIGN IN to log in to the 

    Spacevars
    0 product

    .
    

...

1. Download the 

   Spacevars
   0 product

   artifacts cluster- install-ev.sh and ev-fullpkg.tar.xz to the /opt directory of your system.

   Info
   title Note
   For these artifacts, log in to Salesforce and open an additional browser for the Ribbon Global Software Center (GSC). In the Downloads section, search for the name and version of the required software. Reach out to   Ribbon Support for more information.

   
   

2. Enable read-write-execute permissions for the copied files using the commands given below:
   

   Code Block
   chmod +x cluster-install-ev.sh

   
   

3. Execute the following command to start the installation process:

   Code Block
   ./cluster-install-ev.sh

   
   

4. The installation creates a log file of all actions for historical review/ troubleshooting using the  file format:  $MM-DD-YYYY-ev-install.log . When prompted, enter validation or update information related to your networking configuration environment. Once the installation completes, the console screen displays the message “

   Spacevars
   0 product

   Installation/Upgrade Completed”. 

5. To check whether the containers started  successfully,  use the following command:
   

   Code Block
   docker service ls

   All the services start and all replica-expected-values reach their target (for example 1/1 or 5/5) over the next several minutes.
   Example:
   
   

...

1. To build a Storidge cluster, follow the guidelines in the Install Storidge section.

2. To install Storidge in single-node configuration on the source system, run the following commands:

   Code Block
   curl -fsSL http://download.storidge.com/pub/ce/cio-ce | sudo bash cioctl create --single-node

   
   

3. Shutdown 

   Spacevars
   0 product

   on the source system with docker-compose down

4. Create Storidge profile on the single node system:

   Code Block
   cd scc-build/; cio profile create storidge-profile

   
   

5. Copy root ssh key from single node to root authorized keys on sds node:

   Code Block
   cat /root/.ssh/id_rsa.pub ; vim /root/.ssh/authorized_keys

   Paste the key from other server.

6. Convert the local docker volumes to remote cio volumes in a single command:

   Code Block
   cioctl migrate docker $LOCAL_DOCKER_VOLUME $REMOTE_CIO_VOLUME -p storidge-profile -v --ip $INTERNAL_IP_SDS_NODE_REMOTE

   The remote name should match the naming convention in the cluster.
   Example: ev_mysql_data for things to work seamlessly.

7. Run the normal install process on the cluster and check whether all expected data is there.
8. Update 

   Spacevars
   0 product3

   s or DNS entries to point to the new cluster address.

...