Page History
...
| Info | ||
|---|---|---|
| ||
Although the parent object you are provisioning is an M3UA Configured ASP for Single Association, for brevity the Web UI and the procedures in this section do not repeat this term when referring to the child object screens. |
| Pagebreak |
|---|
To create an M3UA Configured ASP
...
| Cloak |
|---|
|
...
Aborting an M3UA SCTP Association
...
Terminate the SCTP Association between the DSC Platform M3UA and the given ASP (see To terminate an M3UA SCTP Association).
Tip title Tip As an alternative to manual association termination, the relevant Application Server Process (ASP) that is responsible for activating the AS can send an ASP Down message or terminate the given SCTP Association in order to change the AS state.
Note This action does not a block re-connection attempts. In order to block re-connection attempts, the SCTP Server to which the ASP connects should be set to DISABLED (refer to To activate or deactivate all M3UA SCTP Servers). Disabling the SCTP Server does not affect existing ASP SCTP Associations.
Deactivate the ASP (see Configuring an M3UA Configured ASP#To To activate or deactivate an M3UA Configured ASP).
You can deactivate the ASP using the DEACTIVATE action in the M3UA Configured ASP Configuration screens.Note This action terminates the SCTP Association and blocks a re-connection attempt.
You can now delete the M3UA AS as required.
| Note |
|---|
|
...
| Anchor | ||||
|---|---|---|---|---|
|
| Noprint | |
|---|---|
|
| Cloak |
|---|
|
...
| Info | ||
|---|---|---|
| ||
The Gateway Controller (GWC) and Call Agent (for example, C20) ASP Multi Association ASPs are created to allow the SG to determine the type of ASPs involved in the network. An ASP Type attribute has been added to the Multi Association ASP create screen (see Configuring an M3UA Configured ASP#To To create an M3UA Multi Association ASP). The valid values for this attribute are:
GWC ASPs are unique in that their system notification messages do not affect AS state. C20 ASPs are able to affect the state of an AS and, hence, cause the registration of the Genband_C20 Application ID with the MTP3 for link management. GWC and C20 ASPs do not send a Routing Context (RC) parameter in their ASPAC messages. Therefore, they must be configured with an RC to function properly. Only an RC corresponding to a configured AS of type AS MASTER can be assigned to the these ASPs. |
...
- From the Main Menu, click SG.
- Click M3UA.
- Click M3UA Multi ASPs.
...
Enabling IMF with M3UA Single or Multi Association ASP
...
| Info | ||
|---|---|---|
| ||
The M3UA Configured ASP Reset IMF action does not alter the M3UA Global IMF support setting. |
...
Overview
Content Tools