Parameter | Description |
---|
Tone1 FrequencyTone1Frequency | Specifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone, dualTone, or compositeTone. |
Tone1 PowerTone1Power | Specifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone, dualTone, or compositeTone. |
Tone1Apply Tone1 Apply Cadence | Specifies the cadences to which Tone 1 is applied. Application is as follows: If 0, then Tone 1 is applied to Cadences 1, 2, and 3. If 1, then Tone 1 is applied to Cadence 1. If 2, then Tone 1 is applied to Cadence 2. If 3, then Tone 1 is applied to Cadence 3. Only valid if generation method is compositeTone. |
Tone2 FrequencyTone2Frequency | Specifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone or compositeTone. |
Tone2 PowerTone2Power | Specifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone or compositeTone. |
Tone2Apply Tone2 Apply Cadence | Specifies the cadences to which Tone 2 is applied. Application is as follows: If 0, then Tone 2 is applied to Cadences 1, 2, and 3. If 1, then Tone 2 is applied to Cadence 1. If 2, then Tone 2 is applied to Cadence 2. If 3, then Tone 2 is applied to Cadence 3. Only valid if generation method is compositeTone. |
Tone3 FrequencyTone3Frequency | Specifies Tone 3 Frequency in Hertz. If 0, then a single or dual frequency tone is generated. Only valid if generation method is compositeTone. |
Tone3 PowerTone3Power | Specifies Tone 3 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is compositeTone. |
Tone3Apply Tone3 Apply Cadence | Specifies the cadences to which Tone 3 is applied. Application is as follows: If 0, then Tone 3 is applied to Cadences 1, 2, and 3. If 1, then Tone 3 is applied to Cadence 1. If 2, then Tone 3 is applied to Cadence 2. If 3, then Tone 3 is applied to Cadence 3. Only valid if generation method is compositeTone. |
Tone4 FrequencyTone4Frequency | Specifies Tone 4 Frequency in Hertz. If 0, then a single or dual frequency tone is generated. Only valid if generation method is compositeTone. |
Tone4 Power | Specifies Tone 4 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is compositeTone. |
Tone4Apply Tone4 Apply Cadence | Specifies the cadences to which Tone 1 is applied. Application is as follows: If 0, then Tone 4 is applied to Cadences 1, 2, and 3. If 1, then Tone 4 is applied to Cadence 1. If 2, then Tone 4 is applied to Cadence 2. If 3, then Tone 4 is applied to Cadence 3. Only valid if generation method is compositeTone. |
Decay Time Constant | Specifies exponential decay time constant in milliseconds. If 0, then no decay is applied. Maximum value is 2000 msec. Only valid if generation method is compositeTone. |
Decay Frequency Delta | Specifies rate of change (Hz/s) of the tone frequency. If 0, then no frequency change rate is applied. Only valid if generation method is compositeTone. |
Decay Apply Tone Bit Map | Specifies the tones to which decay and frequency rate change are applied. Application is by bitmap: - If 0, then decay/frequency rate change is not applied to any tone. If 1, then decay/frequency rate change is applied to tone 1.
- If 2, then decay/frequency rate change is applied to tone 2.
- If 3, then decay/frequency rate change is applied to tones 1 and 2.
- If 4, then decay/frequency rate change is applied to tones 3 and so on.. If 15, then decay/frequency rate change is applied to tones 1, 2, and 3. Only valid if generation method is compositeTone.
|