Page History
...
- Connect to the Azure portal. Refer to portal.azure.com.
From the menu, click Create a Resource.
- In the search bar, enter Ribbon and click <Enter>. From the selections, click on
.Spacevars 0 series3 Review the product description and click Create.
In the Basics tab, configure the fields as described below.
From the Resource group drop down list in the left side menu, select the Resource Group created previously (i.e., SWeLite-RG)
Info To view recommended VM sizes, refer to Virtual Machine Requirements - Microsoft Azure.
In Virtual machine name field, enter SWeLite.
In Size, click Change size to select the applicable VM size. To determine the required VM size, refer to to Calculating Virtual Machine Requirements for an SBC SWe Lite.Edge Supported VM sizes include:
B1ms
B2s
DS1_v2
DS3_v2
- In Authentication Type, click on Password.
Enter Username, Password, and Confirm Password.
Click Next: Disks.
From OS disk type drop down list, select Premium SSD.
- Click Next: Networking.
Review and verify the default fields.
Click Review + Create.
A screen indicates validation of the VM has passed.
Click Create. A VM status is displayed.
When finished, this message is displayed: Your deployment is complete.From the main menu, select Virtual Machines. The newly created
instance is displayed.Spacevars 0 series3
...
- Connect to the Azure portal. Refer to portal.azure.com.
- From the menu, click Virtual Machines.
- Click on the newly created
.Spacevars 0 series3 1 bold From Settings, select Networking.
Under Inbound port rules, restrict the HTTP and HTTPS access to pubic and private address. See below.
Info To ensure the management interface for the
can only be reached from the IP address(es) you specify, restrict the HTTP and HTTPS access to your personal IP address (per previous step).Spacevars 0 series3 Click Save.
Info The Public IP and Private IP addresses in the example screen below; these values are required for subsequent
logins during Running Initial Setup on SBC SWe LiteEdge.Spacevars 0 series3
Step 7: Run Initial Setup
...