Page History
...
Add_workflow_for_techpubs | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
...
title | Note |
---|
...
Use this procedure to map the network interfaces in the initial setup on the
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
You do not need to perform this procedure if you use the cloud-init function.
...
Info | ||
---|---|---|
| ||
An ESXi VMware console is used as an example for this procedure, other consoles may look slightly different. |
Info | ||
---|---|---|
| ||
To assign a virtual NIC to a physical network adaptor, refer to the respective third-party documentation:
|
...
...
Info | ||
---|---|---|
| ||
Access the console by:
|
...
|
Start
Log in as user
netconfig
with password asConfig!
. Change the password when prompted.Note icon false title Note Passwords must be at least six characters in length and include uppercase and lowercase characters, and numerals.
...
Modify Password
...
:
...
...
Static or DHCP IP
...
:
Choose DHCP or enter a static IP address.
Info For
deployment in Azure, Microsoft does not recommend assigning static IP address on theSpacevars 0 series3
's Ethernet port; you must configure theSpacevars 0 series3
's ethernet port to use DHCP.Spacevars 0 series3 Code Block Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): n
Note icon false title Note
recommends that you first connect the admin port to a network with DHCP server enabled, otherwise you will need to enter a static IP address when prompted for an IP address.Spacevars 0 company Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.
Info title Info The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.
Use the MAC address (identified in the virtual machine editing portion during Installing SBC SWe Edge on your specific platform) in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.
- Enter an admin interface name. Example:
mgt0
. Enter an Ethernet 1 Media interface name. Example:
pkt0
.Enter each subsequent Ethernet Media interface Name, and then apply the changes.
...
Saving Interface Mapping
...
:
...
Info | ||
---|---|---|
| ||
If the network mapping and connection are correct, the Admin IP address will display on the console port. If the Admin IP address does not display, check the connections and network mapping. |
Note | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
If DHCP is used,
|
Note | ||||
---|---|---|---|---|
| ||||
If this is the first time interface mapping is being done, the system will automatically reboot. Any future remapping of interfaces will not automatically trigger a reboot, but will inform the user that they need to do so in order for the changes to be placed into affect. |
...
Panel |
---|
...
|
...
| |
Proceed |
...
...